Pneumatic & Fluid Control Catalog - z7424CT

07 - IMI KIP Valves & Manifolds

Issue link: https://onenorgren.uberflip.com/i/555071

Contents of this Issue

Navigation

Page 2 of 50

VALVES 2 VAL-279 For further information www.norgren.com Standard valve Part Identification Numbering (PIN) System for KIP Series 1, 2, 3, and 6 solenoid The KIP Series 1, 2, 3, and 6 part numbers provide information about every aspect of the product it represents. The first letter is an optional prefix which identifies UL recognized, oxygen or low wattage. The following numbers identify series, ports, housing style, material, valve function, orifice, seal, coil construction and coil temperature, in that order. The numerical value for each respective category represents one of multiple options. Where possible, the organization of this catalog presents information in the order of the part identification number. You may use the number as a guide to finding infor- mation within the catalog. The following charts are keys to understanding the Standard valve Part Identification Number. Not all combinations are available. Consult technical support for special requirements. *Low wattage coils are available in Series 1, 2 & 3 for 2-Way Normally Closed, 3-Way Normally Closed and 3-Way Multi-Purpose functions. ** Isolated version only Standard Series 9 valve part identification *Coils are standard Class B construction H 9H 1HH 2 –HH –HHHH Prefix (optional) Substitute Isolated 2WNC only * G Oxygen Service Y Porting Substitute Manifold Mount 6 #10-32 UNF 7 Body Substitute Stainless Steel 0 Brass 1 Operator 3 ECTFE 8** Acrylic 9** Voltage* 5 VDC 12 VDC 15 VDC 24 VDC Seal Substitute Buna 01 Fluorocarbon 02 EPR** 13 Function Substitute 2 WNC 1 2 WNO 2 3 WNC 4 3 WNO 5 3 WMP 6 3 WDC 7 (a) = Available in Series 1 and 2. (b) = Available in Series 3 & 6. (c) = Available in Series 1, 2 & 6. (d) = Available in Series 2 & 3 only and must be used with molded spade coil or free standing molded coil with lead wires. (e) = Slotted housing (used with 31 & 51 spade coil option), available in Series 2, 3 & 6. Used with molded coil 61 in Series 2 & 3, and 41 in Series 1. (f) = Available in Series 6, 2WNC only. PREFIXES (Optional) Substitute UL Recognized U Oxygen Service Y Low Wattage* - 1.5 Watt A Low Wattage* -2.0 Watt B Low Wattage* -2.5 Watt C Low Wattage* -3.0 Watt D SERIES Substitute Series 1 1 Series 2 2 Series 3 3 Series 6 6 PORT Substitute 1/8" NPTF (a) 4 1/4" NPTF (b) 5 Manifold Mount (c) 6 3/8" NPT (f) 8 HOUSING Substitute Grommet 1 1/2" NPT Conduit 2 Yoke (d) 3 Grommet w/bracket 7 Slotted (e) 9 BODY MATERIAL Substitute Stainless Steel 0 Brass 1 VOLTAGE COIL OPTIONS SEAL Substitute Buna 01 Fluorocarbon 02 Polyurethane (2WNC only) 06 Ethylene Propylene (EPR (Food Grade) 13 ORIFICE Substitute 1/32" 0 3/64" 1 1/16" 2 5/64" 3 3/32" 4 1/8" 5 5/32" 6 3/16" (b) 7 1/4" (b) 8 3/8" (f) 9 FUNCTION Substitute 2WNC 1 2WNO 2 3WNC 3 3WNO 5 3WMP 6 U 2 4 0 1 1 5 - 0 2 5 1 - 24 VDC KIP Solenoid Valves Standard valve selection

Articles in this issue

Links on this page

Archives of this issue

view archives of Pneumatic & Fluid Control Catalog - z7424CT - 07 - IMI KIP Valves & Manifolds