Issue link: https://onenorgren.uberflip.com/i/1435569
147 P G S 10 & P G S 11 S E N S O R S 13 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com PGS10 SENSORS Dimensions in inches (mm) are for reference only In-pad Part Present sensor, PICO 3 Pin/M8 30º Standard Pad, NPN/PNP Output » Abrasion and impact resistant » Eliminates sensor position adjustments » Interface directly to PLC » Impervious to coolants and oils Supply voltage range: 10 VDC (min) to 30 VDC (max) Maximum continuous load current: 200 mA Operating temperature range: 0°C (min) to 60°C (max) Sensing range: 1.2 mm above gripper pad Response time: 25 ms turn-on time, 60 ms turn-off time Target material: Steel and aluminum Short circuit protection: Automatically resets when short is removed Overload protection: Current limits at 325 mA typ. Reverse polarity protection: Up to 36 volts DC Weight: 0.15 lbs (68 g) Order Information Note 1 - Order sensor part number shown above if the sensor is a replacement sensor for a regular jaw gripper already fitted with an angled in-pad sensor. For new installation in regular jaw gripper, add KS or KG at the end of the part number for a kit containing the opposing pad. Angle of opposing pad must match angle of sensor. Note 2 - Sensor must be ordered based on thickness of the material being handled. Pad thickness changes to insure full jaw movement and cam lock action of gripper actuator. Part number (note 1) Description Switch type Material thickness (Note 2) SGS40014P-30 Sensor NPN Various SGS40014PKS-30 Sensor with opposing pad NPN 0.50-3.50 mm SGS40014PKG-30 Sensor with opposing pad NPN 2.01-5.00 mm SGS40015P-30 Sensor PNP Various SGS40015PKS-30 Sensor with opposing pad PNP 0.50-3.50 mm SGS40015PKG-30 Sensor with opposing pad PNP 2.01-5.00 mm 1.70 (43.2) 9.50" +0.5 / -0.0 (241-254 mm) 1.61 (40.9) 0.58 (14.7) 1.21 (30.6) 3-Pin Male Pico SGS40014P-30 SHOWN WEIGHT: .15 lbs. [68 grams] 9.50 (241-254) +0.5 -0.0 Allen nut (included with sensor) 0.06 (1.5) thick 1.00 (25.4) Opposing pad Note 1 Shim required for certain applications (included with sensor) 1.21 (30.6) 0.58 (14.7) 9.5 (241-254) +0.5 -0.0 1.75 (44.5) 1.97 (50.0) 3-pin male pico Technical Data Spare parts 07750 – allen nut 07769 – shim S5 – Schnorr Washer