Issue link: https://onenorgren.uberflip.com/i/1435569
148 P G S 10 & P G S 11 S E N S O R S 13 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com PGS10 SENSORS Dimensions in inches (mm) are for reference only Note 1 - Order sensor part number shown above if sensor is being used with a chisel or flange jaw gripper or is a replacement sensor for a regular jaw gripper already fitted with an in-pad sensor. For new installation in regular jaw gripper, add KS or KG at the end of the part number for a kit containing the opposing pad. Note 2 - Sensor must be ordered based on thickness of the material being handled. Pad thickness changes to insure full jaw movement and cam lock action of gripper actuator. Part number (note 1) Description Switch type Material thickness (Note 2) SGS40014-DP Sensor NPN Various SGS40014-DPKS Sensor with opposing pad (silver) NPN 0.50-3.50 mm SGS40014-DPKG Sensor with opposing pad (gold) NPN 2.01-5.00 mm SGS40015-DP Sensor PNP Various SGS40015-DPKS Sensor with opposing pad (silver) PNP 0.50-3.50 mm SGS40015-DPKG Sensor with opposing pad (gold) PNP 2.01-5.00 mm 1.00 (25.4) Opposing Pad Note 1 Allen nut (included with sensor) Shim required for certain applications (included with sensor) 0.06 Thick (1.5) 0.53 (13.5) 1.70 (43.2) 3-Pin Male Pico 1.61 (40.9) 1.21 (30.7) 9.50 (241-254) +0.5 -0.0 Order information In-pad Part Present sensor, PICO 3 Pin/M8 0º Dual Point Pad, NPN/PNP Output » Abrasion and impact resistant » Eliminates sensor position adjustments » For use with coated panels » LED for on/off status of sensor » Interface directly to PLC » Impervious to coolants and oils » May be used with regular jaw grippers, PGS10R and PGS10R Supply voltage range: 10 VDC (min) to 30 VDC (max) Maximum continuous load current: 200 mA Operating temperature range: 0°C (min) to 60°C (max) Sensing range: 1.2 mm above gripper pad Response time: 25 ms turn-on time, 60 ms turn-off time Target material: Steel and aluminum Short circuit protection: Automatically resets when short is removed Overload protection: Current limits at 325 mA typ. Reverse polarity protection: Up to 36 volts DC Weight: 0.15 lbs (68 g) Technical Data Spare parts 07750 – allen nut 07769 – shim S5 – Schnorr Washer