Issue link: https://onenorgren.uberflip.com/i/1435569
146 P G S 10 & P G S 11 S E N S O R S 13 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com PGS10 SENSORS Dimensions in inches (mm) are for reference only In-pad Part Present sensor, PICO 3 Pin/M8 0º Standard Pad, NPN/PNP Output » Abrasion and impact resistant » Eliminates sensor position adjustments » Interface directly to PLC » Impervious to coolants and oils Supply voltage range: 10 VDC (min) to 30 VDC (max) Maximum continuous load current: 200 mA Operating temperature range: 0°C (min) to 60°C (max) Sensing range: 1.2 mm above gripper pad Response time: 25 ms turn-on time, 60 ms turn-off time Target material: Steel and aluminum Short circuit protection: Automatically resets when short is removed Overload protection: Current limits at 325 mA typ. Reverse polarity protection: Up to 36 volts DC Weight: 0.15 lbs (68 g) Order Information Note 1 - The standard sensor part number (without a KS or KG suffix) can be used with a chisel jaw or flange jaw gripper, or with a regular jaw gripper already fitted with an in-pad sensor. For new installation of an in-pad sensor on a regular jaw gripper, select the part numbers with a KS or KG suffix to include the opposing pad in your kit. Note 2 - Sensor must be ordered based on thickness of the material being handled. Pad thickness changes to ensure full jaw movement and cam lock action of gripper actuator. Part number (note 1) Description Switch type Material thickness (note 2) SGS40014P Sensor NPN Various SGS40014PKS Sensor with opposing pad (Kit) NPN 0.50-3.50 mm SGS40014PKG Sensor with opposing pad (Kit) NPN 2.01-5.00 mm SGS40015P Sensor PNP Various SGS40015PKS Sensor with opposing pad (Kit) PNP 0.50-3.50 mm SGS40015PKG Sensor with opposing pad (Kit) PNP 2.01-5.00 mm 0.47 (11.9) 1.70 (43.2) 9.5 " +0.5 / -0.0 (241-254 mm) 1.61 (40.9) 1.21 (30.6) 3-Pin Male Pico SGS40014P SHOWN WEIGHT: .15 lbs. [68 grams] 9.50 (241-254) +0.5 -0.0 Allen nut (included with sensor) 0.06 (1.5) thick 1.00 (25.4) Opposing pad Note 1 1.21 (30.6) 0.47 (11.9) 3-pin male pico 9.5 (241-254) +0.5 -0.0 1.75 (44.5) 1.97 (50.0) Shim required for certain applications (included with sensor) Technical Data Spare parts 07750 – allen nut 07769 – shim S5 – Schnorr Washer