Issue link: https://onenorgren.uberflip.com/i/653022
3 32 F I L T E R S / R E G U L A T O R S For further information visit www.imi-precision.com or contact us at (800) 229-1875 EXCELON ® MODULAR SYSTEM FILTER/REGULATORS B72G, B73G, B74G • High efficiency water and particle removal • Quick release bayonet bowl • Push to lock adjusting knob with tamper evident accessory Technical Data Material Fluid: Compressed air Maximum pressure: Transparent bowl: 150 psig (10 bar) Metal bowl: 250 psig (17 bar) B72G metal bowl w/ auto drain: 150 psig (10 bar) Operating temperature*: Transparent bowl: (72) -30° to 125°F (-34° to 50°C) Metal bowl: (72) -30° to 150°F (-34° to 66°C) (73, 74) -30° to 175°F (-34° to 80°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Elastomers: nitrile Bottom plug: acetal R72G Body: zinc Bonnet: acetal Valve: Polypropylene and Geolast ® R73G, R74G Body: aluminum Bonnet: aluminum or zinc Valve: Polypropylene and Geolast ® Models Accessories Autodrain Model No. Manual Drain Model No. Port size PTF Flow SCFM* Bowl type Element Wall mounting bracket Neck mounting bracket Tamper evident cover wire Gauge 0 to 160 psig Replacement element Service kit** B72G-2AK-AE3-RMG B72G-2AK-QD3-RMG 1/4" 80 Metal 40µ 4224-50 74316-50 4255-51 Gauge included 5925-02 4383-500 B73G-3AK-AD3-RMG B73G-3AK-QD3-RMG 3/8" 123 Metal 40µ 4424-50 4461-50 4455-51 Gauge included 4438-03 4383-600 B73G-4AK-AD3-RMG B73G-4AK-QD3-RMG 3/8" 123 Metal 40µ 4424-50 4461-50 4455-51 Gauge included 4438-03 4383-600 B74G-4AK-AD3-RMG B74G-4AK-QD3-RMG 3/8" 212 Metal 40µ 4324-50 4368-51 4355-51 Gauge included 4338-05 4383-700 B74G-6AK-AD3-RMG B74G-6AK-QD3-RMG 3/4" 212 Metal 40µ 4324-50 4368-51 4355-51 Gauge included 4338-05 4383-700 Products may be special ordered to meet alternative technical specifications not listed here. Please call 1-800- 229-1875 to inquire. * Typical flow with 150 psig inlet pressure, 90 psig set pressure a15 psig droop from set and 40 µm element. NOTE: Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. ** Kit includes: diaphragm, valve, valve spring, and o-rings.