Issue link: https://onenorgren.uberflip.com/i/561455
4 AIR PREPARATION PRODUCTS APP-132 For further information www.norgren.com Quikclamp Use with all 73 and 74 Series Products to provide modular installation capability. Flanges on the products slide into V grooves in the Quikclamp. Two face-sealing o-rings in the Quikclamp provide a positive seal when the clamp is closed and the captive screw is tightened. A Quikclamp adds 0.54" (13.6 mm) to the overall length of a combination unit. Tighten screw with a 5/32" (4 mm) hex or T25 Torx wrench. (30 in. lbs. Torque) 4314-51AccQukclmp Material: Zinc Quikclamp part number: 4314-51 O-ring kit part number: 4384-770 ______________________________ Quikmount Pipe Adapters Use with the Quikclamp to provide threaded connections to the sys- tem piping. Each pipe adapter adds 0.71" (18 mm) to the overall length of a combination unit (each kit contains one adapter). 4315-01/12AccPipeAdptr Material: Aluminum Quikclamp Wall Mounting Bracket Use with the Quikclamp to provide secure mounting to a wall, machine panel or other flat surface. Use No. 12 (6 mm) screws to mount bracket to wall. 3.25 (83) 4.00 (102) 0.95 (24) Material: Zinc Part number: 4313-50 ______________________________ Quikclamp and Wall Mounting Bracket See preceding paragraphs for descriptions and dimensions. Port C L 2.00 (51) Wall Material: Zinc Part number: 4314-52 L74 1 quart 4314-55 ______________________________ Porting Block Installs between two Quikclamps to provide three additional 1/4" outlets for auxiliary air. A Porting Block adds 1.30" (33 mm) to the overall length of a com- bination unit. 4316-02/06AccPrtBlk Material: Zinc Replacement Pressure Switch Use only with the pressure switch subbase. Cannot be used with the standard porting block. 4346-01AccPressSw Material: Aluminum Pressure switch part number: 4346-01 ______________________________ Subbase Mounted Pres- sure Switch Monitors air pressure and provi- des an electrical output when the pressure drops below or exceeds an adjustable preset pressure. Installs between two Quikclamps. Also provides three additional 1/4" outlets for auxiliary air. A Subbase Mounted Pressure Switch adds 1.30" (33 mm) to the overall length of a combination unit. 4346-50/52AccSubMtdSw Specifications Maximum Pressure: 300 psig (20 bar) Maximum Temperature: 175°F (80°C) Adjustable Range: 30 to150 psig (2 to 10 bar) Shipped from factory preset at 90 psig (6.2 bar). Maximum Voltage: 240V ac/dc Maximum Current: 5 Amp Hysteresis at Midpoint: 12% Materials: Zinc subbase, Aluminum switch Manifold Block Installs with Quikclamps. Ports are threaded 3/4" pipe to provide ma- nifolding capability for up to three components. 80 (3.15) 2.25 (57) 3.15 (80) Material: Zinc ______________________________ Transition Connector Enables connection of Excelon 72 to 74 units. A transition connector adds 0.06" (1.5mm) to the overall length of a combination unit. 4417-01Adapter Material: Aluminum Part Number: 4417-01 73 and 74 Series Modular Components Part number 1) Port size and (Qty) thread 4315-01 1/4" PTF 4315-02 3/8" PTF 4315-03 1/2" PTF 4315-04 3/4" PTF 4315-09 1/4" ISO G 4315-10 3/8" ISO G 4315-11 1/2" ISO G 4315-12 3/4" ISO G Part number Auxiliary port size and thread 4316-50 1/4" PTF 4316-52 1/4" IS0 G Part number Auxiliary port thread 4346-50 1/4" PTF 4346-52 1/4" ISO G Part number Side port threads 4328-50 3/4" PTF 4328-52 3/4"ISO Rc