Issue link: https://onenorgren.uberflip.com/i/561455
AIR PREPARATION PRODUCTS 4 APP-131 For further information www.norgren.com Quikclamp Maximum Pressure: 17 bar (250 psig) Maximum Temperature: 65°C (150°F) Use with all Excelon 72 Products to provide modular installation capability. Flanges on the products slide into V grooves in the Quikclamp. Two face-sealing o-rings in the Quikclamp provide a positive seal when the clamp is closed and the captive screw is tightened. Tighten screw with a 3 mm hex wrench or a T15 Torx wrench. Quikclamp Service Kit (contains 2 nitrile o-rings): 4384-570 A Quikclamp adds 0.26" (6.5 mm) to the overall length of a combination unit. 4214-51(72Quikclamp,O-ring) Part Number: 4214-51 ______________________________ Manifold Block Installs with Quikclamps. Ports are threaded 3/8" pipe to provide manifolding capability for up to three components. 4228-01/03(72MnfldBlk) 1.98 (50) 1.76 (45) Quikclamp Wall Mounting Bracket Use with the Quikclamp to provide secure mounting to a wall, machine panel or other flat surface. Use 3/16" (5 mm) screws to mount bracket to wall. 4213-89(72QuikclampWallMtngBrktDim) 0.59 (15) 2.91 (74) 2.32 (59) Part Number: 4213-89 ______________________________ Quikmount Pipe Adapters Use with the Quikclamp to provide threaded connections to the system piping. A pipe adapter adds 0.63" (16 mm) to the overall length of a combination unit. Quikclamp and Wall Mounting Bracket See Quikclamp paragraph for descriptions and dimensions. Use 3/16" (5 mm) screws to mount bracket to wall. 4214-52(72Quikclamp&WallMntgBrktDim) Port C L Wall 1.50 (38) Part Number: 4214-52 ______________________________ Porting Block Installs between two Quikclamps to provide three additional 1/4" outlets for auxiliary air. A Porting Block adds 1.13" (28.5 mm) to the overall length of a combination unit. ______________________________ Replacement Pressure Switch Use only with pressure switch sub-base. Cannot be used with the standard porting block. Part Number: 4246-01 Sub-base Mounted Pressure Switch Monitors air pressure and provides an electrical output when the pressure drops below or exceeds an adjustable preset pressure. Installs between two Quikclamps. Also provides two additional 1/4" outlets for auxiliary air. P 1 max: 250 psig (17 bar) Temperature: 14° to 150°F (-10° to 65°C) Adjustable 30 to 150 psig (2 to 10 bar). Shipped from factory preset at 90 psig (6.3 bar) Max. Voltage: 240 V a.c./d.c. Max. Current: 5 Amp Hysteresis at Midpoint: 12% A Sub-base Mounted Pressure Switch adds 1.13" (29 mm) to the overall length of a combination unit. ______________________________ Transition Connector Enables connection of Excelon 72 to 74 units. Typically this will allow F74C/H high grade coalescing filters to be flow matched with R72 regulators. Part Number: 4417-01 Side Port Threads Part Number 3/8" PTF 4228-01 3/8" ISO G 4228-03 Port Size and Thread Part Number (Quantity of 1) 1/4" PTF 4215-02 3/8" PTF 4215-03 1/4" ISO G 4215-08 3/8" ISO G 4215-09 72 Series Modular Components Auxiliary Port Size & Thread Part Number 1/4" NPT 4216-50 1/4" IS0 G 4216-52 Auxiliary Port Threads Part Number 1/4" PTF 4246-50 1/4" ISO G 4246-52