Issue link: https://onenorgren.uberflip.com/i/561431
AIR PREPARATION PRODUCTS 4 APP-67 For further information www.norgren.com F47 18 Series Oil Removal Filter (Coalescing) 1-1/2" and 2" Port Sizes 0.3 0.2 0.1 0 PRESSURE DROP 5 4 3 2 1 0 psid bar d PORT SIZE: 2" ELEMENT: SATURATED 0 50 100 150 200 250 dm 3 /s AIR FLOW 0 100 200 300 400 500 scfm 36 (2.5) 58 (4.0) INLET PRESSURE: psig (bar g) 116 (8.0) 150 (10.0) 90 (6.3) High Flow Element 90 (6.3) 175 (12.0) FLOW CHARACTERISTICS Maximum flow to maintain stated oil removal performance F47SaturatedCurve Typical Performance Characteristics 8.16 (207) 8.22 (209) 1/4 turn drain 15.70 (399) 1/4 turn drain 23.58 (599) † 24.24 (615)** High Flow Filter with Automatic Drain 39.94 (1015) ** Auto drain 15.10 (383) 1.86 (47) 3.16 (80) Automatic Drain Auto drain 23.68 (601) † Service Indicator Bowl Bowl Body Can be disassembled without removal from the air line Standard service indicator OTE: Install an F18 filter with a 5 µm filter element upstream of the F47 filter for maximum service life. Ordering information Models listed include service indicator, automatic drain, metal bowl with sight glass, and PTF threads. * Maximum flow at 90 psig (6.3 bar) inlet pressure to maintain stated oil removal performance. F47-H01-H0DH Port Size Substitute 1-1/2" B 2" C Threads Substitute PTF A ISO G parallel G Drain Substitute Automatic A Manual, 1/4 turn M Alternative Models ISO Symbols Port Size Body and Element Model Numbers Flow scfm (dm3/s)* Weight lbs (kg) Element kit 1-1/2" Standard F47-B01-A0DA 250 (118) 15.51 (7.04) std flow 3203-02 2" Standard F47-C01-A0DA 300 (142) 14.26 (6.47) Auto Drain Manual Drain Fluid: Compressed air, neutral gases NOTE: Contact technical support for use with other media. Maximum pressure 250 psig (17 bar) Operating temperature:* -30° to 150°F (-34° to 65°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Particle removal: Down to 0.01 µm Maximum remaining oil content in outlet air: 0.01 ppm at 70°F (20°C) with an inlet concentration of 17 ppm Nominal bowl size: 7 fluid ounce (0.2 liter) Manual drain connection: 1/8-27 and 1/8-28 female pipe thread. Automatic drain connection: 1/8-27 and 1/8-28 male pipe thread. - Flexible tube with 3/16" (5mm) minimum I.D. can be connected to the automatic drain. Drain may fail to operate if the tube I.D. is less than 3/16" (5mm). Avoid restrictions in the tube. Materials Body, intermediate body, bowl: aluminum Metal bowl liquid level indicator lens: transparent nylon Filter element: synthetic fiber and polyurethane foam Elastomers: chloroprene, nitrile Service indicator Body: transparent nylon Internal parts: acetal Spring: stainless steel Elastomers: nitrile Technical data Dimensions in inches (mm)