Issue link: https://onenorgren.uberflip.com/i/561431
4 AIR PREPARATION PRODUCTS APP-66 For further information www.norgren.com 4.32 (110) 4.75 (121) Service Indicator 1.25 (32) 2.61 (66) 10.75 (273) Automatic Drain 2.40 (61) 17.40 (441)** Service Indicator 1.25 (32) 2.61 (66) Manual Drain 17.29 (439)** 10.63 (270) 2.40 (61) F46 F46 Oil Removal (Coalescing) Filter 3/4", 1", and 1-1/4" Port Sizes Typical Performance Characteristic PRESSURE DROP 0.3 0.2 0.1 0 bar d 5 4 3 2 1 0 psid PORT SIZE: 1" ELEMENT: COALESCING, OIL SATURATED 0 25 50 75 100 125 dm 3 /s AIR FLOW 0 50 100 150 200 250 scfm 58 (4.0) 36 (2.5) INLET PRESSURE: psig (bar g) 90 (6.3) 116 (8.0) 150 (10.0) Maximum flow to maintain stated oil removal performance High efficiency oil and particle removal Standard service indicator turns from green to red when the filter element needs to be replaced NOTE: Install an F17 filter with a 5 µm filter element upstream of the F46 filter for maximum service life. Ordering information Models listed include service indicator, automatic drain, metal bowl with sight glass, and PTF threads. ISO Symbols Port Size Model Numbers Maximum Flow* scfm (dm3/s) Weight lbs (kg) Element Kit** 3/4" F46-601-A0DA 90 (42) 4.11 (1.86) 5351-04 1" F46-801-A0DA 125 (59) 4.05 (1.84) 1-1/4" F46-A01-A0DA 125 (59) 4.29 (1.95) * Maximum flow for oil-saturated element at 90 psig (6.3 bar) inlet pressure to maintain stated oil removal performance. **Service kit contains coalescing element, element o-ring, bowl o-ring, and drain gasket. F4 6 -H 01-H 0 DH Port Size Substitute 3/4" 6 1" 8 1-1/4" A Threads Substitute PTF A ISO G parallel G Bowl Substitute Metal with sight glass D Drain Substitute Automatic A Manual M Alternative Models Auto Drain Manual Drain Fluid: Compressed air, neutral gases NOTE: Contact technical support for use with other media. Maximum pressure 250 psig (17 bar ) Operating temperature:* -30° to 150°F (-34° to 65°C ) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C) Particle removal: Down to 0.01 µm Maximum remaining oil content in outlet air: 0.01ppm at 70°F (20°C) with an inlet oil concentration of 17 ppm. Nominal bowl size: 1 quart US (1 liter) Manual drain connection: 1/8-27 and 1/8-28 female pipe thread. Automatic drain connection: 1/8-27 and 1/8-28 male pipe thread. - Flexible tube with 3/16" (5mm) minimum I.D. can be connected to the automatic drain. Drain may fail to operate if the tube I.D. is less than 3/16" (5mm). Avoid restrictions in the tube. Materials Body: aluminum Bowl: aluminum Bowl sight glass: Pyrex Elastomers: chloroprene, nitrile Filter element: synthetic fiber and polyurethane foam Technical data Dimensions in inches (mm)