Issue link: https://onenorgren.uberflip.com/i/561428
AIR PREPARATION PRODUCTS 4 APP-57 For further information www.norgren.com Dimensions in inches (mm) F39 Oil removal (Coalescing) Filter 1/8" and 1/4" Port Sizes Fluid: Compressed air, neutral gases NOTE: Contact technical support for use with other media. Maximum pressure Transparent bowl: 150 psig (10 bar) Metal bowl: 250 psig (17 bar) Operating temperature:* Transparent bowl: -30° to 125°F (-34° to 50°C) Metal bowl: -30° to 150°F (-34° to 65°C) * Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F) Particle removal: Down to 0.01 µm Air quality: Maximum remaining oil content of air leaving the filter: 0.01ppm at 70°F (21°C) with an inlet oil concentration of 17 ppm. Nominal bowl size: 1 fluid ounce (31 ml) Drain connection: 1/8" male pipe thread Automatic drain operation: Spitter type drain operates momentarily when a rapid change in air flow occurs or when the supply pressure is reduced. Materials Body: zinc Bowl:Transparent: polycarbonate Metal: Zinc Element: Synthetic fiber and polyurethane foam Elastomers: nitrile, chloroprene Technical data 0.157 (4) Dia † 0.5 (13) Deep † Automatic Drain Manual Drain 1.45 (37) 0.91 (23) 0.73 (19) 0.91 (23) 6.07 (154) ** 0.38 (10) 4.10 (104) 6.22 (158) ** 0.38 (10) 4.25 (108) 1.63 (42) ** Minimum clearance to remove bowl. † Mounting holes. FLOW CHARACTERISTICS 0 2 4 6 8 10 dm 3 /s AIR FLOW 0 4 8 12 16 20 scfm 0.8 0.6 0.4 0.2 0 PRESSURE DROP bar d 10 8 6 4 2 0 psid PORT SIZE: 1/4" ELEMENT: DRY INLET PRESSURE: psig (bar) 36 (2.5) 23 (1.6) 91 (6.3) 58 (4.0) 150 (10) 116 (8) 180 (12) F39 Compact design High efficiency oil and particle removal Typical Performance Characteristics Alternative Models F3 9 -H 0 0 -H 0HH Port Size Substitute 1/8" 1 1/4" 2 Ordering information Models listed include PTF threads, automatic drain and transparent bowl. ISO Symbols Port Size Model Numbers Saturated Flow* scfm (dm3/s) Dry Flow scfm (dm3/s) Weight lbs (kg) Element Kit** 1/8" F39-100-A0TA 6.0 (2.8) 11.2 (5.3) 0.28 (0.13) 4141-10 1/4" F39-200-A0TA 6.4 (3.0) 12.2 (5.8) 0.28 (0.13) 4141-10 Auto Drain Manual Drain * Maximum flow at 90 psig (6.3 bar) inlet pressure to maintain stated oil removal performance. ** Includes element and O-rings Threads Substitute PTF A ISO G parallel G Bowl Substitute Transparent T Metal M Drain Substitute Automatic A Manual M FLOW CHARACTERISTICS 0 1 2 3 4 5 dm 3 /s AIR FLOW 0 2 4 6 8 10 scfm 0.8 0.6 0.4 0.2 0 PRESSURE DROP bar d 10 8 6 4 2 0 psid PORT SIZE: 1/4" ELEMENT: SATURATED INLET PRESSURE: psig (bar) 36 (2.5) 23 (1.6) 91 (6.3) 58 (4.0) 150 (10) 116 (8) 180 (12) F39 Maximum flow to maintain stated oil removal performance