Issue link: https://onenorgren.uberflip.com/i/561428
4 AIR PREPARATION PRODUCTS APP-58 For further information www.norgren.com R07 General purpose Snap action knob locks pressure setting when pushed in Standard relieving models allow reduction of outlet pressure even when the system is dead-ended R46 Non-repairable Wrench flats for easy installation Relieving piston design allows reduction of downstream pressure when the system is dead-ended Choice of left to right or right to left flow Alternative Models R07-H 0 0 -HHHH Port Size Substitute 1/8" 1 1/4" 2 Diaphragm Substitute Relieving R Non relieving N Gauges Substitute With G Without N Ordering information ISO Symbols Port Size Model Flow† scfm (dm3/s) Weight lb (kg) 1/8" R07-100-RGKA 14 (6.5) 0.31 (0.19) 1/4" R07-200-RGKA 15 (7) 0.31 (0.19) 1/4" R46-200-RNLA (left to right flow) 13 (6) 0.2 (0.09) 1/4" R46-202-RNLA (right to right flow) 13 (6) 0.2 (0.09) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C) † Typical flow with 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure and 15 psig (1 bar) droop from set. Threads Substitute PTF A ISO G parallel G Outlet Pressure Adjustment Ranges* Substitute 1 to 10 psig (0.1 to 0.7 bar) A 5 to 50 psig (0.3 to 3.5 bar) E 5 to 100 psig (0.3 to 7 bar) K 5 to 125 psig (0.3 to 8.6 bar) L Miniature General Purpose Regulators R07, R46 R07 Fluid: Compressed air, neutral gases NOTE: Contact technical support for use with other media. Maximum pressure 300 psig (20 bar) Operating temperature: -34° to 150°F (-35° to 65°C) * * Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F). R46 Fluid: Compressed air Maximum pressure: 250 psig (17 bar) Operating temperature*: -30° to 150°F (-34° to 65°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Materials R07 Body: zinc Bonnet: acetal Knob: Acetal Valve seat: acetal Elastomers: nitrile Valve: brass, nitrile R46 Body: zinc Knob: nylon Valve: TPV Valve seat: acetal Elastomers: nitrile Technical data * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. R07 R46 Relieving Non relieving