Issue link: https://onenorgren.uberflip.com/i/555875
1 ACTUATORS ACT-116 For further information www.norgren.com QA/8000/61/* QA/8000/51/* Standard models QA/8000/61/* (roller bearing) Standard models QA/8000/51/* (plain bearing) Conforms to ISO 6431, ISO 15552, VDMA 24562 and NFE 49 003 1 Ensures protection against external rotary and bending forces Guide rods run through bearings protected by wiper rings Provides accurate guidance for unsupported loads Technical data Operating temperature: +32°F to +176°F (0°C to +80°C) maximum Materials Guide block, nut & mounting plate: anodised aluminum Plain bearings: Sintered bronze QA/8***/51/* Steel roller bearing QA/8***/61/* Rods: Chrome plated stainless steel Wiper rings: nitrile rubber Guide blocks for ISO/VDMA cylinders QA/8000/51/* QA/8000/61/* Ø 32 ... 100mm Ø Guide rod Ø Model Suitable for cylinders Magnetic Non-magnetic 32 10 QA/8032/51/* DA/8032/M, PDA/182032/M DA/8032, PDA/182032 40 12 QA/8040/51/* DA/8040/M, PDA/182040/M DA/8040, PDA/182040 50 12 QA/8050/51/* DA/8050/M, PDA/182050/M DA/8050, PDA/182050 63 12 QA/8063/51/* DA/8063/M, PDA/182063/M DA/8063, PDA/182063 80 16 QA/8080/51/* DA/8080/M, PDA/182080/M DA/8080, PDA/182080 100 16 QA/8100/51/* DA/8100/M, PDA/182100/M DA/8100, PDA/182100 * Insert stroke length in mm. Ø Guide rod Ø Model Passive locking cartridge Locking force (N) Suitable for cylinders Magnetic # Non-magnetic # 32 12 QA/8032/61/* QA/8032/63 600 DA/8032/M, PDA/182032/MIL # DA/8032, PDA/182032/IIL # 40 16 QA/8040/61/* QA/8040/63 1000 DA/8040/M, PDA/182040/MIL # DA/8040, PDA/182040/IIL # 50 20 QA/8050/61/* QA/8050/63 1500 DA/8050/M, PDA/182050/MIL # DA/8050, PDA/182050/IIL # 63 20 QA/8063/61/* QA/8050/63 1500 DA/8063/M, PDA/182063/MIL # DA/8063, PDA/182063/IIL # 80 25 QA/8080/61/* QA/8080/63 3000 DA/8080/M, PDA/182080/MIL # DA/8080, PDA/182080/IIL # 100 25 QA/8100/61/* QA/8080/63 3000 DA/8100/M, PDA/182100/MIL # DA/8100, PDA/182100/IIL # * Insert stroke length in mm. Locking cartridges should be ordered separately. Active – pressure applied to lock, passive – pressure released to lock. 2 required per guide block. Note: For all applications please consult our Technical Service # When using guide blocks (QA/8000/61) for profile cylinders PDA/182000 you have to order a model with a barrel which is turned at 90° so that the port threads are in line with the two switch grooves.