3
SWITCHES
AND
SENSORS
For further information www.norgren.com
SAS-26
Standard Multi-Point Level Switches
Customize larger single point detectors for your multi-point
application
Up to 72" overall length
Up to 6 control points
Standard Multi-Point Level controls provide a convenient method of
customizing your level control with standard lead times and costs
Standard Multi-Point offers up to 6 actuation
levels on a single tank entry
Obtain a copy of the Level Switch Inquiry Application
Sheet and define the general requirements:
1. Determine mounting type.
2. Select the stem and float material.
3. Choose float type, noting temperature ranges, pressure limitations, and
minimum recommended specific gravity.
4. Select switch type considering voltage and load requirements.
5. Specify wiring group.
6. Determine the number of actuation points and the distance from the
bottom of the mounting plug. Specify L1 through L6.
7. Specify LO-Overall length, which is L1 plus the "C" dimension of your
float selection.
8. Determine switch logic, either normally closed or normally open. When
specifying switch logic, please indicate switch condition when tank is
dry.
9. Provide a sketch or drawing along with other pertinent information for
proper switch selection.
L1
L0
L2
L3
L4
L6
L5
WIRING SPST SWITCHES SPDT SWITCHES
Wire
Common
Group 1
#22 AWG
Black
Group 2
#22 AWG
None
Group 3
#22 AWG
Black
Group 4
#22 AWG
None
NO/NC SW Com. NO/NC NO NC SW Com NO NC
L1
L2
L3
L4
L5
L6
Red
Yellow
Blue
Brown
Orange
Gray
Red
Yellow
Blue
Brown
Orange
Gray
Red
Yellow
Blue
Brown
Orange
Gray
Red
Yellow
Blue
Brown
Orange
Gray
Wh/Red
Wh/Yellow
Wh/Blue
Wh/Brown
Wh/Orange
Wh/Gray
Red
Yellow
Blue
Brown
Orange
Gray
Wh/Red
Wh/Yellow
Wh/Blue
Wh/Brown
Wh/Orange
Wh/Gray
Wh/Blk/Red
Wh/Blk/Yel
Wh/Blk/Blue
Wh/Blk/Brn
Wh/Blk/Orng
Wh/Blk/Gray
KIP Multi-Point
