Issue link: https://onenorgren.uberflip.com/i/555071
2 VALVES VAL-312 For further information www.norgren.com Operator Mounting Type Manifolds • Series 1 and Series 2 operators are available for gang mounting on aluminum, brass or plastic sub-plates. • Manifolds can be selected with 1/8" NPTF or 1/4" NPTF ports. • Orifice sizes up to 3/16" with precision machined-in seats are standard. • Both 2-Way and 3-Way operators may be combined on the same manifold. • Manifolds with up to 16 stations are available as standard. • An upper manifold plate can be ordered for common porting on 2-Way Normally Open and all 3-Way valves. Isolation Style Manifold • Provides a dry isolated valve operator for the control of corrosive and aggressive media. • The diaphragm seal (Fluorocarbon, or EPR), isolates all metal parts from the media. • The manifold material is available in PVC, acetal, PVOP, and acrylic and other engineered plastics. • Operators are available as a 2-way normally closed valve only However, two valves can be combined for 3-way operation. • Orifice sizes are available from 1/32" to 5/32" with Cv valves up to 0.545. Manifold Mount Valve Type Manifolds • KIP Series 1, 2, 6 and Series 9 valves are available for gang mounting on aluminum, brass or plastic sub-plates. • Manifolds can be selected with 10-32 UNF, 1/8" NPTF or 1/4" NPTF ports. • Orifice sizes up to 1/8" in Series 1, 2, and orifice sizes up to 1/4" in Series 6 models are available, and 1/16" in Series 9. • Pressure ratings are the same as those listed for the individual valves in this catalog except that the maximum operating pressure is limited to 400 PSI for UL recognition. • 2-Way and 3-Way valves may be combined on the same manifold Up to 16 stations are available on Series 1 and 2 valves, and up to 6 stations are standard on Series 6 valves. • An upper manifold plate can be ordered for common porting on 2-Way Normally Open and all 3-Way valves. This option is not available for Series 9. Solenoid valve manifolds simplify the purchasing, installation, testing, and repair/replacement of solenoid valve components while enhancing system integrity. Integrating a group of solenoid valves, pressure switches, check valves, regulators or gauges into one assembly makes a complete package, eliminating tubing, fittings and potential leak points. Additionally, wire harness requirements are simplified. Manifolds Simplify solenoid valve installation with KIP manifold assemblies. KIP Series manifolds provide an economical and effective means of gang mounting solenoid valves Modular valves and other components can be replaced or maintained without disturbing plumbing thus reducing maintenance costs and downtime. Manifolds