Issue link: https://onenorgren.uberflip.com/i/504900
1 53 P A P A For further information www.imi-precision.com VALVES Symbol Model Orifice (mm) Port size Kv-value (m 3 /h) Operating pressure (bar) 8254000.9150.00000 8 G1/4 1.9 0…10 8254100.9150.00000 10 G3/8 3 0…10 8254200.9150.00000 12 G1/2 3.4 0…10 8254300.9150.00000 20 G3/4 5.8 0…10 8254400.9150.00000 25 G1 8 0…10 Symbol Model Orifice (mm) Port size Kv-value (m 3 /h) Operating pressure (bar) 8259000.9150.00000 8 G1/4 1.9 0…10 8259100.9150.00000 10 G3/8 3 0…10 8259200.9150.00000 12 G1/2 3.4 0…10 8259300.9150.00000 20 G3/4 5.8 0…10 8259400.9150.00000 25 G1 8 0…10 Models - Brass Models - Stainless steel Medium: Neutral gases and liquids (82540) Slightly aggressive, gases and liquids (82590) Flow direction: Fixed Operating pressure: 0 … 10 bar (0 ... 145 psi) Temperatur: Fluid –10°C … +90°C (14 ... +194°F) max. Ambient –10°C … +50°C (14 ... +122°F) max. Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F). Materials: Body: Brass (82540) Stainless steel (82590) Seat Seal: NBR-K Internal Parts: Stainless steel, PVDF, Brass For contaminated fluids installations of an upstream filter is recommended. Technical features Solenoid interchangeable without tools (Click-on ® ) Other functions and operating voltages available on request Solenoid operators Design DIN VDE 0580 Voltage range ±10% Duty cycle 100% ED Protection EN 60529 IP65 Connector Form A to DIN EN 175301-803 (included) Electrical details for all solenoid systems Voltage and Frequency Solenoid 9151/9154 *1) Code Voltage Code Frequency Voltage Frequency Power consumption Inrush- Holding- power power 024 00 24 V DC - 18 W 18 W 024 50 24 V AC 50 Hz 20 VA 20 VA 110 50 110 V AC 50 Hz 20 VA 20 VA 120 60 120 V AC 60 Hz 20 VA 20 VA 230 50 230 V AC 50 Hz 20 VA 20 VA Voltage and Frequency Solenoid 9301/9304 *1) 024 00 24 V DC - 18 W 18 W 024 50 24 V AC 50 Hz 20 VA 20 VA 110 50 110 V AC 50 Hz 20 VA 20 VA 120 60 120 V AC 60 Hz 20 VA 20 VA 230 50 230 V AC 50 Hz 20 VA 20 VA Voltage and Frequency Solenoid 9401/9404 *1) 024 00 24 V DC - 38 W 38 W 024 49 24 V AC 40 ... 60 Hz 42 VA 42 VA 110 49 110 V AC 40 ... 60 Hz 42 VA 42 VA 120 49 120 V AC 40 ... 60 Hz 42 VA 42 VA 230 49 230 V AC 40 ... 60 Hz 42 VA 42 VA ATEX Category Protection Solenoid Standard voltage II2GD EEx me II T3 T 140°C 9356 24 V DC, 110 V AC, 230 V AC II3GD EEx nA II T4 T 135°C 9326 24 V DC, 110 V AC, 230 V AC II3GD EEx nA II T4 T 135°C 8426 24 V DC, 110 V AC, 230 V AC II2GD EEx me II T3 T 140°C 8441 24 V DC, 110 V AC, 230 V AC II3GD EEx nA II T4 T 135°C 9176 24 V DC, 110 V AC, 230 V AC II2GD EEx me II T3 T 140°C 9191 24 V DC, 110 V AC, 230 V AC II3GD EEx nA II T4 T 135°C 9426 24 V DC, 110 V AC, 230 V AC Additional solenoid systems *1) Voltage Buschjost 82540 & 82590 Solenoid actuated diaphragm valve with forced lifting 2/2 N/C, G1/4…G1 According to DIN VDE 0580 at a solenoid temperature of +20°C. At elevated temperatures, the power of the solenoid coil could be reduced by up to 30%. Attention! The conditions imposed on the Ex approvals lead to reduction of the permissible standard temperature ranges in the cases of explosion protected solenoids.