Issue link: https://onenorgren.uberflip.com/i/1300825
94 P G S 10 S E N S O R S 10 For more information or for additional configurations, please contact us as NASInsideSales@imi-precision.com Dimensions in inches (mm) are for reference only PGS10 SENSORS In-pad Part Present sensor, MICRO 4 Pin/1 Key M12 30º Standard Pad, NPN/PNP Output » Abrasion and impact resistant » Eliminates sensor position adjustments » Interface directly to PLC » Impervious to coolants and oils Supply voltage range: 10 VDC (min) to 30 VDC (max) Maximum continuous load current: 200 mA Operating temperature range: 0°C (min) to 60°C (max) Sensing range: 1.2 mm above gripper pad Response time: 25 ms turn-on time, 60 ms turn-off time Target material: Steel and aluminum Short circuit protection: Automatically resets when short is removed Overload protection: Current limits at 325 mA typ. Reverse polarity protection: Up to 36 volts DC Weight: 0.15 lbs (68 g) Order Information Note 1 - The standard sensor part number (without a KS or KG suffix) can be used with a chisel jaw or flange jaw gripper, or with a regular jaw gripper already fitted with an in-pad sensor. For new installation of an in-pad sensor on a regular jaw gripper, select the part numbers with a KS or KG suffix to include the opposing pad in your kit. Note 2 - Sensor must be ordered based on thickness of the material being handled. Pad thickness changes to ensure full jaw movement and cam lock action of gripper actuator. Part number (note 1) Description NPN/PNP Material thickness (note 2) SGS40014-30 Sensor NPN Various SGS40014KS-30 Sensor with opposing pad (Kit) NPN 0.50-3.50 mm SGS40014KG-30 Sensor with opposing pad (Kit) NPN 2.01-5.00 mm SGS40015-30 Sensor PNP Various SGS40015KS-30 Sensor with opposing pad (Kit) PNP 0.50-3.50 mm SGS40015KG-30 Sensor with opposing pad (Kit) PNP 2.01-5.00 mm Spare parts 07750 - allen nut 07769 - shim 4-Pin One Key Male MICRO 1.70 (43.2) 0.58 (14.7) 1.61 (40.9) 1.21 (30.6) SGS40015-30 SHOWN WEIGHT: .15 lbs. [68 grams] 4.5 +0.5 / -0.0 (114 - 127) +0.5 -0.0 4.50 (114-127) +0.5 -0.0 Shim required for certain applications (included with sensor) 0.06 (1.5) thick Allen nut (included with sensor) Opposing pad note 1 1.00 (25.4) 1.21 (30.6) 0.58 (14.7) 1.75 (44.5) 9.5 (241-254) +0.5 -0.0 4-Pin, Single Key Male MICRO 1.97 (50.0) Technical Data