Issue link: https://onenorgren.uberflip.com/i/1300825
93 P G S 10 S E N S O R S 10 For more information or for additional configurations, please contact us as NASInsideSales@imi-precision.com Dimensions in inches (mm) are for reference only PGS10 SENSORS SGS40014 and SGS40015 Shim req'd for certain applications (Included w/sensor) Allen nut. (Included w/sensor) 0.06 (1.5) thick 1.00 (25.4) Opposing pad Note 1 1.21 (30.6) 0.47 (11.9) 4.5 (114-127) +0.5 -0.0 1.75 (44.5) 1.97 (50.0) 4-pin 1-key male micro In-pad Part Present sensor, MICRO 4 Pin/1 Key M12 0º Standard Pad, NPN/PNP Output » Abrasion and impact resistant » Eliminates sensor position adjustments » LED for part present status of sensor » Interface directly to PLC » Impervious to coolants and oils Supply voltage range: 10 VDC (min) to 30 VDC (max) Maximum continuous load current: 200 mA Operating temperature range: 0°C (min) to 60°C (max) Sensing range: 1.2 mm above gripper pad Response time: 25ms turn-on time, 60ms turn-off time Target material: Steel and aluminum Indicator light: RED: On when target is detected; 360° visibility Short circuit protection: Automatically resets when short is removed Overload protection: Current limits at 325 mA typ. Reverse polarity protection: Up to 36 volts DC Weight: 0.15 lbs (68 g) Order Information Note 1 - The standard sensor part number (without a KS or KG suffix) can be used with a chisel jaw or flange jaw gripper, or with a regular jaw gripper already fitted with an in-pad sensor. For new installation of an in-pad sensor on a regular jaw gripper, select the part numbers with a KS or KG suffix to include the opposing pad in your kit. Note 2 - Sensor must be ordered based on thickness of the material being handled. Pad thickness changes to ensure full jaw movement and cam lock action of gripper actuator. Part number (note 1) Description Sensor type Material thickness (note 2) SGS40014 Sensor NPN Various SGS40014KS Sensor with opposing pad (Kit) NPN 0.50-3.50 mm SGS40014KG Sensor with opposing pad (Kit) NPN 2.01-5.00 mm SGS40015 Sensor PNP Various SGS40015KS Sensor with opposing pad (Kit) PNP 0.50-3.50 mm SGS40015KG Sensor with opposing pad (Kit) PNP 2.01-5.00 mm Spare parts 07750 - allen nut 07769 - shim 1.61 (40.9 ) 1.70 (43.2) 0.47 (11.9) 4.5 +0.5 / -0.0 (114-127) 4-Pin 1-Key Male MICRO 1.21 (30.6) SGS40015 SHOWN WEIGHT: .15 lbs. [68 grams] 4.50 (114-127) +0.5 -0.0 Shim required for certain applications (included with sensor) Allen nut (included with sensor) 0.06 (1.5) thick 1.00 (25.4) Opposing pad Note 1 1.21 (30.6) 0.47 (11.9) 4.5 (114-127) +0.5 -0.0 1.75 (44.5) 1.97 (50.0) 4-Pin 1-Key Male MICRO Technical Data