Datasheets

1 ACTUATORS ACT-02 For further information www.norgren.com Series Substitute FPT F-Plus Twin Rod Cylinder FPT Bore Substitute 3/4" 075 1-1/16" 106 1-1/2" 150 2" 200 Stroke Increments of 1/16" Options selector Technical features Medium: Filtered, lubricated or non- lubricated, compressed air Maximum Operating Pressure: 200 psig (13.6 bar) Temperature Range*: Standard nitrile seals: -40°F to 200°F (-40°C to 93°C) Viton / High temp seals: -20°F to 400°F (-29°C to 205°C) * With dew point of supply air less than air temperature below 36°F (2°C). Lubrication: All FPT cylinders are pre-lubricated during assembly with a Teflon ® based grease for non-lube service and long life. Materials: Cylinder Body: 304 Stainless Steel Head and Cap: Clear anodized aluminum Tooling Plate: Clear anodized aluminum Piston Rods: 303 stainless steel Rod Bearings: Oil impregnated sintered bronze Piston: Aluminum Alloy Rod & Piston Seals: Nitrile FPT 106 x 1.750 - BAM - PS *Magnetic option used in combination with viton (HT) option is not reliable above 200°F. Overall cylinder length increases with magnetic option (see dimensional tables). Must include switch rail option with magnet. *Screw clearance to allow bolt head to pass through - no counter bores Options Substitute Counterbored Tool Plate CTP Viton / High Temp seals HT Switch rail and position M1, M2, M3, M4 Magnetic Piston* PS Alternate port location PL(__) Rotated Pivot Mount (Pivot mount rotated 90° from standard) RM Rotated Tooling Plate (Tooling plate and rod axis will be vertical with respect to the ports) RT Rod extension over std. (Specify additional length) RX(_) Stainless Steel Fasteners (125 psi max) SF Mounting Options Substitute Basic Mount BAM *Screw Clearance Holes Front SCF *Screw Clearance Holes Rear SCR *Screw Clearance Holes Both SCB Front Trunnion TMF Rear Trunnion TMR Trunnion Both Ends TMB Pivot Mount PTM Threaded Mounting Holes Front THF Threaded Mounting Holes Rear THC Threaded Mounting Holes Both Ends THB Switch Rail Position FO-04 CP CHK BY: Manufacturing Co. .75 BORE 1.5:1 JR 11/12/13 SCALE: DATE: DRN BY: (BI)FO-04 FO-04 -M1 -M -M3 -M4 FPT Series F-Plus Twin Rod Non-Rotating Cylinders 3/4" to 2" bores

• Cover