Norgren Featured Datasheets
Issue link: https://onenorgren.uberflip.com/i/1085675
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. © 2018 Norgren, Inc. P-Series NFPA Cylinder with Profile Tube 1.50"-4.00" Bores Series Substitute Series P Cylinder P Series P Double Rod End Cylinder DP Series EP Cylinder (Ecology seals) EP Series EP Double Rod End Cylinder (Ecology Seals) EDP Mount Substitute Universal (Standard – MS4 & SNC) 16 ‡ Head Rectangular Flange (MF1) 03 Cap Rectangular Flange (MF2) 04 Tie Rods Ext. Both Ends (MX1) 06 Tie Rods Ext. Cap End (MX2) 6C Tie Rods Ext. Head End (MX3) 6R (2) Tie Rods Ext. Both Ends (MX4) 6B Side Lugs (MS2) 09 Side End Angle (MS1) 11 Cap Clevis (MP1) 12 Cap Clevis (MP2) 22 Cap Eye (MP4) 42 Head Cushion Substitute No Cushion* 3 Adjustable Adaptive Cushion (Standard) 7 Cap Cushion Substitute No Cushion* 3 Adjustable Adaptive Cushion (Standard) 7 Rod Diameter Substitute 0.625" diameter rod (1.50", 2.00", 2.50" Bores) A 1.00" diameter rod (3.25", 4.00" Bores) B Options Back-to-Back cylinder configuration BB (**) Piston rod stud - Medium strength threadlocker BL Case Hardened Piston Rod HR Passive Rod Lock 1 LE Magnetic Piston (Standard/Required) PS Piston rod stud - High strength threadlocker RS Rod Extension (Specify additional length of rod) RX(_) 303 Stainless Steel Piston Rod (Hard Chrome Plated) SS Special Rod Thread (Specify thd. type) T(_) Thread Extension (Specify additional length of thd.) TX(_)*** Stroke Stroke in inches to three decimal places up to 100" Bore 1-1/2" Bore 1.50 2" Bore 2.00 2-1/2" Bore 2.50 3-1/4" Bore 3.25 4" Bore 4.00 Rod Thread Small Male – Solid (KK) (Standard) 1 Intermediate Male – Solid (CC) 2 Female (KK) 3 Full Thread Male – Solid (FF) 6 Plain Rod End – No Thread 7 Options Selector ‡ Universal mount cylinders include MS4 mounting holes and sleeve nut construction. Mounting kits should be ordered separately on Universal mount cylinders. * Non cushioned cylinders are only available with Ecology Piston seals. Cushion seal will be removed. Note: It is recommended to use cushions for applications with operating speeds in excess of 20" per second. ** BB option must reference 2nd stroke. If mounting is selected, mount will be assembled with respect to the primary stroke. *** Thread extension in increments of 0.125" up to 2.00" max. 1 Option HR (case hardened piston rod) required with LE rod lock option EP 16 7 7 A 1-1.50X6.000-PS-RX(1.250) 01/19 en us 1.5.186.06