Issue link: https://onenorgren.uberflip.com/i/1041782
For further information, visit www.norgren.com and use the new improved search function. If you cannot see the option you require please contact us. 13 AC TUATORS 1 LINEAR ROBOTS NHSXY, NHSXZ » H-Bot and T-Bot construction » Carriage constructed of high strength 7075 aluminium » Self-lubricating linear guides » Integral Reducer Drive (optional) » ARC-Power Belt » One drive belt serpentines around both axes; no Y motor (or Z) required » Enhanced strength and robustness » Zero backlash » Self-aligning » High precision to 0.001" » Lengths up to 20 . » Built in linear ball rail guide » 25% higher thrust leads to higher loading capacity » Worry- and maintenance-free long life, even in applications that require 24/7 motion » Ballscrew type thrust with belt drive speed ability . NHSXY Technical Data Linear Bearings: -15°C to 240°C (5°F to 464°F) Ball Bearings: -30°C to 250°C (-22°F to 482°F) Gear Reducers: -50°C to 232°C (-58°F to 449°F) Belt, Standard: 0°C to 80°C (32°F to 176°F) Belt, Low Temperature: -25°C to 5°C (-13°F to 41°F) Belt, High Temperature: 20°C to 110°C (68°F to 230°F) Material Carriage: Aluminium Drive ends: Aluminium Extrusion: Aluminium Belt: Steel reinforced polyurethane How It Works Online at norgren.com The Norgren NHSXY and NHSXZ actuators use a unique two-axis system for either the X-Z or X-Y motion application. The unit features a single continuous belts operate in a coordinated fashion to provide motion in both axes. The single continuous belt winds around the two axes much like an automobile serpentine belt. Both motors are stationary, eliminating cable tracks and expensive flex cable from the system. Having the two motors in the X-axis eliminates overall weight of the carried axis, resulting in a lighter carried load. The smaller load will require a smaller overall motor selection since the torque of both motors is shared and thus doubles the available torque. A smaller motor selection results in less cost, less energy, and fits easier within a designated installation envelope. The final multi-axis construction is aesthetically please and provides a natural, non-obtrusive install.