Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. © 2015 Norgren Automation Solutions, LLC
02
10/15
26338 12314SP
PGS10 Series
Pressroom Gripper System
General purpose gripper for transfer finger or EOAT use.
Wide angle Jaw opening accommodates blanks with
inconsistent pick up location.
Available jaw configurations:
Regular Jaw
Chisel Jaw
Shovel Jaw
Flange Jaw
22° x 0° 22° x 11° 22° x 22°
45° x 0° 45° x 22° 45° x 45°
70° x 0° 70° x 35° 70° x 70°
Indirect and In-pad part present sensors available.
Indirect double blank sensor available.
See data sheet 00732SP for detailed information.
Low profile chisel/shovel jaw useful in dies with low clearance
or low lift parts.
Available jaw configurations:
22° x 0° 22° x 14°
45° x 0° 45° x 14°
70° x 0° 70° x 14°
Indirect and In-pad part present sensors available.
Indirect double blank sensor available.
One jaw pad is mounted on a moving jaw (upper).
The lower jaw does not have a removable pad.
See data sheet 00768SP for Chisel Jaw detailed information.
See data sheet 13007SP for Shovel Jaw detailed information.
Mounted vertically from gantry tooling.
Drop down on part and reach around edge to lift.
Flange jaw allows gripping directly on the formed flange edge.
Available jaw configurations:
22° x 0°
45° x 0°
70° x 0°
Indirect and In-pad part present sensors available.
See data sheet 00770SP for detailed information.
