Issue link: https://onenorgren.uberflip.com/i/1256801
XM0 XS0 XD0 XDX XMX XSX XDD RDR XMD 6mm Tube 1/8 Rc 1/8 Rc 8mm Tube 3/8 Tube 1/8 NPT 1/8 NPT 1/4 Tube See the following See the following XM0 XS0 XD0 XDX XMX XSX XDD RDR XMD 6mm Tube 1/8 Rc 1/8 Rc 8mm Tube 3/8 Tube 1/8 NPT 1/8 NPT 1/4 Tube See the following See the following Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. © 2015 Norgren Automation Solutions, LLC 10/15 26338 12314SP 03 PGS10 Series Pressroom Gripper System P G S 1X X X X X X X X X X X Pressroom Gripper System 10 or 11 Series Jaw Type: Regular, Chisel, Flange, or Shovel Top Jaw Open Angle Bottom Jaw Open Angle Part Number Mask Air Port Orientation and Fitting Type Pad Type Pad Width Material Thickness Connection and Mounting Preferences Sensor Output Sensor Type Body Hard Coat Aluminum Jaw Pads Hardened Steel Working Pressure 60 psi min - 100psi max 413 kPa min - 689 kPa Min Lubrication Permanent for non-lube air Grip Force Up to450 lb (200 kg) Cycles MCBF 5 Million Actuation Times 0.050 close / <0.090 open Weight 1.6 lbs (716 grams) Air Ports 1/8" NPS or 1/8 Rc Front Face Hardened Steel General Notes In-Pad sensor cannot be used with: 0.5" [12.7mm] wide pads Rubber pads 15° or 45° angle pads Indirect sensors cannot be used with: Rubber Pads Double Point Pads Jaw Pads Flat pads for general purpose gripping. Angle pads for more challenging panels. Air Fittings Air fittings can be ordered preassembled to the gripper. Special Purpose Pads Double Point Pads won't load up on galvanized panels Rubber Pads won't leave scratches on panels. See techinical data sheets for more options.