Issue link: https://onenorgren.uberflip.com/i/791475
125 D O U B L E B L A N K A N A LY Z E R 8 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com Dimensions are for reference only DBA SENSOR VACUUM CUP MOUNTING BRACKET WITH SUCTION CUPS CAUTION: Contact type sensors must come in contact with the blank to take a measurement. Air gaps up to .003 inch are acceptable, if this gap stays consistent from measurement cycle to measurement cycle. Sensor bumpers and vacuum cups can interfere with the sensor face contact with the blank. Failure to install and adjust properly can result in double sheets not being detected. Note: The maximum single blank thickness rating of the DBA sensor must be lowered to 85% of its normal rating if bumpers or vacuum cups are mounted on the sensor. DSM3625-0X DBA Sensor Spring Mount DBA Sensor 9.24 (234.70) 2X 4.46 (113.28) 2X 2.66 (67.58) DSM3625-0X Sensor Spring Mount Sensor 9.24 (234.70) 2X 4.46 (113.28) 2X 2.66 (67.58) DSM3625-0X DBA Sensor Spring Mount DBA Sensor 9.24 (234.70) 2X 4.46 (113.28) 2X 2.66 (67.58) Technical Data Order information Application Threads for venturi or vacuum pump connections Part number Cup Included Venturi Included Cup Thread Venturi Thread Recommended Cup DSM3625 – – M10 Female Threads 3/8-18 NPS Female Threads LTC10-075-D DSM625-01 3" Flat Cups – M10 Female Threads 3/8-18 NPS Female Thread LTC10-075-D DSM3625-02 3" Flat Cups 2 Port Venturis M10 FemaleThreads 3/8-18 NPS Female Thread LTC10-075-D DSM3625-03 – – 3/8-18 NPSM Male Threads 3/8-18 NPS Female Thread LTC10-075 DSM3625-04 3" Flat Cups – M10 Female Threads 1/4 R Female Threads LTC10-075-D » Bracket positions cups on both sides of sensor for precise presentation of sensor face against blank » Compression motion of cups during vacuum provides 6 to 8 mm of sensor mount spring compression » Compatible with all sizes of Sensor Spring Mounts » Sensor Spring Mounts are not included with any of these assemblies Supplied for mounting to sensor spring mount assembly. 2X M10 x 30mm BHCS