Issue link: https://onenorgren.uberflip.com/i/688176
Pneufit C Metric 05 Method of assembly Features Technical data Medium Compressed air Operating pressure 750mm Hg vacuum, up to 10 bar Temperature 0°C to 60°C Materials Body: PBT Seals: NBR (silicone free) u-packing and O-rings Threaded bodies: nickel plated brass Release sleeve and backing ring: POM Grab-ring: stainless steel Collar: nickel plated zinc Thread sealant: Chemiseal G 175 Tube sizes Standard sizes: 4, 6, 8, 10, 12, 16 mm Miniature sizes: 3, 4, and 6 mm Thread sizes Standard sizes: M5, M6, 1/8, 1/4, 3/8 and 1/2 inch, ISO G and ISO R Miniature sizes: M3, M5 and 1/8 inch ISO R Tube types Nylon 11 or 12 Polyurethane 85, 95 or 98 durometer 1 2 4 5 6 3 7 1. Ensure that the end tube is cut square and is free from burrs. 2. Push the tube through the release ring button and grab ring into the fitting. 3. Push the tube firmly through the 'O' ring until it bottoms on the tube stop, then pull back. 4. To disconnect, push the tube into the fitting, hold down the release button and withdraw the tube. 1. Impact resistant PBT body in black for Pneufit C and light gray for Pneufit M. 2. Stem seal provides leak tight 360° swivel connection. 3. Nickel plated brass threads and notches on hex to signify NPT. 4. Release buttons are red for metric, grey for inch, and light grey oval for Pneufit M. 5. Stainless steel grab ring retains soer tube and provides easy releasability. 6. Silicon free U-packing for leak tight tube seal under side loading. 7. Pre-applied thread sealant on tapered threads and recessed captive o-ring on parallel threads.