Pneufit C Inch 05
Method of assembly
Features
1
2
4
5
6
3
7
1. Ensure that the end tube is cut
square and is free from burrs.
2. Push the tube through the
release ring button and grab
ring into the fitting.
3. Push the tube firmly through the 'O' ring
until it bottoms on the tube stop, then
pull back.
4. To disconnect, push the tube into the
fitting, hold down the release button
and withdraw the tube.
1. Impact resistant PBT body in black for
Pneufit C and light gray for Pneufit M.
2. Stem seal provides leak tight 360° swivel
connection.
3. Nickel plated brass threads and notches on
hex to signify NPT.
4. Release buttons are red for metric, grey for
inch, and light grey oval for Pneufit M.
5. Stainless steel grab ring retains soer tube
and provides easy releasability.
6. Silicon free U-packing for leak tight tube
seal under side loading.
7. Pre-applied thread sealant on tapered
threads and recessed captive o-ring on
parallel threads.
Technical data
Medium
Compressed air
Operating pressure
29.5" Hg vacum up to 150 psi
Temperature
32°F to 140°F
Materials
Body: PBT
Seals: NBR (silicone free) u-packaging
and O-rings
Threaded bodies: nickel plated brass
Release sleeve and backing ring: POM
Grab-ring: stainless steel
Collar: nickel plated brass
Thread sealant: Chemiseal G 175
Tube sizes
Standard sizes: 5/32", 3/16", 1/4", 5/16", 3/8" and
1/2"
Miniature sizes: 1/8", 1/4", 5/32"
Thread sizes
Standard sizes: 10-32 UNF, 1/8", 1/4", 3/8 and 1/2"
NPT and ISO R
Miniature sizes: 10-32 UNF, 1/16" and 1/8" NPT
Tube types
Nylon 11 or 12
Polyurethane 85 or 95 durometer
