Issue link: https://onenorgren.uberflip.com/i/651279
COMMERCIAL VEHICLE 7 CV-19 For further information visit store.norgren.com/us or call 1.800.514.0129 In stock Ships within one week Power Down, Lift Axle Control Valve K990037 5 port 2 position, solenoid operated spring return, power down lift axle valve Built in suspension bag regulation Integral Push-to-Connect (PTC) DOT fittings for quicker installation times Energize the solenoid to lower the axle Long lasting spool design High flow compact valves Medium: Filtered and lubricated or non- lubricated compressed air or vacuum Operation: 5/2 solenoid operated spring return, power down Solenoid: 12 VDC, ± 25% of voltage tolerance 9-15 VDC nominal range Connector: Packard electrical connector Port size: Port 1: common exhaust; 1/2" PTC DOT Port 2: Lift bag, non-regulated; 1/2" PTC DOT Port 4: Suspension bag, regulated; 3/8" PTC DOT Operating pressure: Minimum 35 psi Maximum 150 psi Temperature range: -20ºF to 120ºF* *Consult technical services for temperatures below 35°F Materials: Body: Aluminum Spool: Anodized aluminum Fittings: Brass Elastomers: Nitrile and special nitrile based low-friction elastomers Regulator knob: Acetal Typical applications: Commercial vehicles, truck and trailer manufacturers, body builders. Lift axle control Technical data Power Down, Lift Axle Control Valve Model Voltage Tolerance DC Power Protection Class Electrical Duty Coil K990037 ± 25% automotive specification 3.4 & 4.7 w automotive specification IP65 (DIN 40 050) with cable clamp 100 % (Continuously rated) Fully encapsulated 2.08 (53.1) 4.29 (109.1) 2.64 (67.0) 7.625 (184.1) 1/8 NPT Gage Port Both Sides 1/2" DOT Fitting 3 5 2 1 4 1 2 0.84 (21.3) 0.24 (6.1) 0.75 (19.1) 2X Ø 0.27 (Ø 6.9) 3/8" DOT Fitting 1/2" DOT Fitting 1.26 (32.0) 3.66 (93.1) 1.25 (31.8) 0.63 (15.9) 1.08 (27.4) 2 4 3 1 5 Non–Regulated Air (Lift Bag) Regulated Air (Suspension Bag) LIFT AXLE Power Down means the solenoid must be energized to lower the axle. Dimensions (Inches)