Issue link: https://onenorgren.uberflip.com/i/651279
4 AIR PREPARATION PRODUCTS APP-36 For further information visit store.norgren.com/us or call 1.800.514.0129 * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges *Filter/regulator service kit contains slip ring, diaphragm, valve seat with o-ring, valve, valve spring, element, element gasket, and bowl o-ring **Lubricator service kit contains sight-feed dome seal, cartridge o-ring, and bowl o-ring. 1.68 (43) 1.26 (32) 2.13 (54) 1.50 (38) 1.78 (45) 1.78 (45) 0.174†† (4) Dia. 0.29 (7) Dia. 0.55 (14) 1.12 (28) 2.67 (68) 3.72 (94) Automatic Drain 0.38 (10) 3.87 (98) Manual Drain 1.65 (42) 3.07 (78) Without Drain 8.31 (211)† 0.55 (14) †Minimum distance required to remove bowl †† Mounting holes Models Accessories PTH Series Manual Drain Model No. Auto Drain Model No. Port size PTF Gauge Outlet pressure range psig Neck mounting bracket Sight feed dome Filter/ regulator service kit Lubricator service kit PTH-100-M1AA PTH-100-A1AA 1/8" included 5 to 100 18-025-003 4055-50 3820-12 3795-03 PTH-200-M1AA PTH-200-A1AA 1/4" included 5 to 100 18-025-003 4055-50 3820-12 3795-03 PTH-201-M1AA PTH-201-A1AA 1/4" not included 5 to 100 18-025-003 4055-50 3820-12 3795-03 Compact design Filter removes liquids and solid particles down to 5 µm Push to lock adjusting knob Micro-Fog lubricator provides air line lubrication to one or more air driven tools or other devices Nearly constant oil density output with varying air flow Fluid: Compressed air Maximum pressure: 150 psig (10 bar) Operating temperature*: 0°F to 125°F (-20°C to 50°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C) Typical flow at 100 psig (7 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a droop of 15 psig (1 bar) from set: 1/8" ports: 10 scfm (5 dm3/s) 1/4" ports: 14 scfm (7 dm3/s) Drain connection: 1/8" male pipe Filter/Regulator Particle removal: 5 µm Gauge ports: 1/8" PTF Lubricator Start point (i.e., minimum flow required for lubricator operation): 0.5 scfm (0.24 dm3/s) at 90 psig (6.3 bar) inlet pressure Nominal bowl capacity: 1 fluid ounce (31 ml) Materials: Bodies: Zinc Filter/Regulator bonnet: Acetal Filter/Regulator valve seat: Acetal Bowls: Polycarbonate Lubricator sight-feed dome: Transparent nylon Filter element: Sintered polypropylene Elastomers: Nitrile Technical data In stock Ships within one week Miniature Filter/Regulator-Lubricator Combination Units 1/8" PTF, 1/4" PTF Dimensions in inches (mm)