SWITCHES
AND
SENSORS
3
SAS-31
For further information visit store.norgren.com/us or call 1.800.514.0129
In stock
Ships within one week
Abrasion and impact resistant.
For light duty applications with sensor tip radial loads
up to 35 lbs.
Exceptional for thread detection and thread quality
detection.
Immune to weld fields and resistant to weld slag.
Minimum nut thickness is:
8.0mm (.31") for M10 nut
10.0mm (.39") for M12 nut
Maximum blank thickness is 2.5mm (.10")
Sensor connector:
3-pin (male) 8mm (pico) connector
Operating temperature range:
32°F to 212°F (0°C to 100°C)
Target material:
Ferrous/Non-Ferrous
Dimensions Inches (mm)
.70 (17.8)
.39 (10.0)
.30 (7.6)
.3.15 (80)
1.75 (44.4)
Sensor Monitor Cable Spring mount Weight
SNP01012 SMR36010 (NPN) SCE13000 6 ft (2m) Straight SAB30403 0.037 lbs/ 17 gm
SMR37010 (PNP) SCE13005 16 ft (5m) Straight
SCE13001 6 ft (2m) Angled
SCE13005RA 16 ft (5m) Angled
Sensor Monitor Cable Spring mount Weight
SNP01012 SMR36012 (NPN) SCE13000 6 ft (2m) Straight SAB30403 0.037 lbs/ 17 gm
SMR37012 (PNP) SCE13005 16 ft (5m) Straight
SCE13001 6 ft (2m) Angled
SCE13005RA 16 ft (5m) Angled
M10 Nut/Thread Detector System
M12 Nut/Thread Detector System
Technical data
Nut/Thread Sensor
SNP01012
