Issue link: https://onenorgren.uberflip.com/i/561446
4 AIR PREPARATION PRODUCTS APP-116 For further information www.norgren.com Fluid: Water and compressed air, neutral gases NOTE: Contact technical support for use with other media. Maximum pressure: 250 psig (17 bar) Operating temperature: Water service: 35° to 150°F (2° to 66°C) Air service: -30° to 150°F (-34° to 66°C) * *When used in air service, air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Port connections: 1/4" OD tube (brass nut and plastic ferrule supplied) Recommended tubing: 1/4" soft PVC or Polyethylene tubing. Avoid aluminum, copper, and hard plastic tubing. Materials Body: Acetal Bonnet: Acetal Valve: Stainless steel with EPDM seal (CFR21 FDA food and water contact compliant) Valve seat: Acetal Diaphragm: Stainless steel and nitrile (CFR21 FDA food and water contact compliant) Technical data Non-relieving models. Acetal plastic, corrosion resistant construction Low torque, non-rising adjusting knob. Designed for use with deionized water and potable water systems. Plastic (not assembly) is NSF approved. All elastomers are CFR 21 FDA food and water contact compliant. Non-relieving models only. Ordering information Model listed has non-relieving diaphragm, and 5 to 100 psig (0.3 to 7 bar) outlet pressure adjustment range. † ISO Symbols Port Connection Model Flow* scfm (dm3/s) Flow** U.S. gpm (lpm) Weight lb (kg) 1/4" tube nut and ferrule 11 044 003 3.0 (1.4) 0.7 (2.65) 0.16 (0.08) For additional models contact the factory. * Approximate flow with 100 psig (7 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a 15 psig (1 bar) droop from set. * Approximate flow with 100 psig (7 bar) inlet pressure, 60 psig (4 bar) set pressure and a 15 psig (1 bar) droop from set. † Outlet pressure can be adjusted to pressures in excess, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. Non relieving 11-044 Pressure Regulator Water and Compressed Air Service 1/4" Tube connection Alternative Models Outlet Pressure Adjustment Range† Substitute 1 to 10 psig (0.1 to 0.7 bar) 001 2 to 50 psig (0.3 to 3.5 bar) 002 5 to 100 psig (0.3 to7 bar) 003 1 1 - 0 4 4 -HHH