Issue link: https://onenorgren.uberflip.com/i/561446
4 AIR PREPARATION PRODUCTS APP-114 For further information www.norgren.com Technical data Fluid: R14: Compressed air, neutral gases NOTE: Contact technical support for use with other media. R16: Water and compressed air Maximum inlet pressure: 400 psig (27 bar) Operating temperature Water service: 35° to 175°F (2° to79°C)† Air service: -30° to 175°F (-34° to 79°C)* * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). † R16 bras bonnet & body combination max temp. 200°F. Type R14: Piston, relieving or non-relieving R16: Diaphragm, relieving or non-relieving Gauge ports: 1/8" PTF Factory preset outlet pressure settings: 3 to 99 psig (0.2 to 6.8 bar) Outlet pressure tolerance: Outlet pressure setting - psig (bar) Tolerance - psig (bar)** 3 to 20 psig (0.21 to 1.38 bar) ± 1.0 psig (0.07 bar) 21 to 50 psig (1.45 to 3.45 bar) ± 2.0 psig (0.14 bar) 51 to 99 psig (3.52 to 6.84 bar) ± 3.0 psig (0.21 bar) ** When outlet pressure is preset at the factory, the following conditions exist Inlet pressure: 100 psig (6.9 bar) for outlet pressures up through 95 psig (6.6 bar) 125 psig (8.6 bar) for outlet pressures of 96 through 99 psig (6.7 through 6.8 bar) Materials Body and bonnet R14: aluminum R16: brass Valve: brass, nitrile Valve seat: acetal resin Elastomers: nitrile Technical data R14 R16 Non-relieving models for air and water service Relieving models for air service allow reduction of outlet pressure even when the system is dead-ended R14 has aluminum body and bonnet R16 has brass body and bonnet Factory preset, tamper resistant pressure setting Ordering information Models listed are relieving type for compressed air service with PTF threads and with gauge ports. ISO Symbols Port Model Flow† scfm (dm3/s) Flow†† U.S. gpm (lpm) Weight lb (kg) 1/8" PTF R14-100-R**A 12 (5.7) 1.3 (4.9) 0.2 (0.09) 1/8" PTF R16-100-R**A 12 (5.7) 1.3 (4.9) 0.7 (0.32) 1/4" PTF R14-200-R**A 12 (5.7) 1.3 (4.9) 0.2 (0.09) 1/4" PTF R16-200-R**A 12 (5.7) 1.3 (4.9) 0.7 (0.32) † Approximate flow with 100 psig (7 bar) inlet pressure, 80 psig 5.5 bar() set pressure and a 15 psig (1 bar) droop from set. †† Approximate flow with 100 psig (7 bar) inlet pressure, 60 psig (4 bar) set pressure and a 15 psig (1 bar) droop from set. Relieving Non relieving R14, R16 Miniature, Preset, Nonadjustable Pressure Regulator Water and Compressed Air Service 1/8" or 1/4" PTF Port Sizes