Issue link: https://onenorgren.uberflip.com/i/561443
AIR PREPARATION PRODUCTS 4 APP-99 For further information www.norgren.com R05 Fluid: Compressed air, neutral gases NOTE: Contact technical support for use with other media. Maximum pressure: 300 psig (20 bar) Operating temperature: With Acetal bonnet -13° to 150°F (-25°C to 66°C)* With metal bonnet -13°F to 175°F (-25°C to 80°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Contact technical support for use below -13°F (-25°C). NOTE: For applications to -40°F (-40°C) contact technical support. B05 Fluid: Compressed air Maximum pressure: 300 psig (20 bar) Operating temperature: With Acetal bonnet -13° to 150°F (-25°C to 66°C)* With metal bonnet -13°F to 175°F (-25°C to 80°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Contact technical support for use below -13°F (-25°C). NOTE: Low temperature options available to -40°F (-40°C). Particle removal: 5 µm or 40 µm filter element Materials R05 Body: 316 stainless steel Bonnet: 316 stainless steel with T-handle or acetal with stainless steel adjusting screw Valve: 316 stainless steel with fluorocarbon elastomer Valve seat: acetal Springs: 302 stainless steel Elastomers: fluorocarbon B05 Body and bowl: 316 stainless steel Bonnet: 316 stainless steel with T-handle or acetal with stainless steel adjusting screw Valve: 316 stainless steel with fluorocarbon elastomer Valve seat: acetal Springs: 302 stainless steel Drain: stainless steel or acetal Element: sintered polypropylene Elastomers: fluorocarbon Autodrain: nitrile Technical data Stainless Steel Products R05, and B05 R05 Ordering Information Standard models listed are relieving type with 5 to 125 psig (0.3 to 8.5 bar) outlet pressure adjustment range* and PTF threads. A gauge is not included. B05 Filter/Regulators R05 Regulators Port Size Model Bonnet type Flow** scfm (dm3/s) Weight lb (kg) Service kit† 1/4" PTF R05-200-RNLA Acetal 15 (7) 0.32 (0.15) 3407-71 1/4" PTF R05-232-RNLA Stainless steel w/ T-handle 15 (7) 0.58 (0.26) 3407-71 Designed for use in corrosive environments Metallic parts meet NACE Standard MR-01-75* *National Association of Corrosion Engineers (NACE) MR-01- 75 defines requirements for sulphide stress cracking resistant materials used in well-head and other corrosive environments. B05 Ordering Information Standard models listed include a relieving diaphragm, manual drain, 5 µm element, 5 to 125 psig (0.3 to 8.5 bar) outlet pressure adjustment range* and PTF threads. A gauge is not included. Port Size Model Bonnet type Drain Flow** Weight Service kit† 1/4" PTF B05-233-M1LA Acetal manual (Acetal) 15 (7) 0.85 (0.38) 3820-08 1/4" PTF B05-238-M1LA Stainless steel w/ T-handle manual (SS) 15 (7) 1.20 (0.54) 3820-08 1/4" PTF B05-233-A1LA Acetal automatic (SS) 15 (7) 0.85 (0.38) 3820-08 * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified.Do not use these units to control pressures outside of the specified ranges. ** Typical flow with 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure and 15 psig (1 bar) droop from set. † Service kit includes diaphragm, seals, o-rings, and valve