Issue link: https://onenorgren.uberflip.com/i/561443
4 AIR PREPARATION PRODUCTS APP-104 For further information www.norgren.com F22 (general purpose) Fluid: Compressed air, neutral gases NOTE: Contact technical support for use with other media. Maximum pressure: 250 psig (17 bar) Operating temperature: 0° to 175°F (-20° to 80°C)* * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Particle removal: 5 or 25 micron Flow: 98 scfm (46 dm 3 /s) Typical flow with 90 psig inlet pressure and 5 psig pressure drop. Materials Body: stainless steel Bowl: stainless steel Element: sintered stainless steel Elastomers: nitrile F22H (High Flow, coalescing) Fluid: Compressed air, Hydrocarbon gas† Maximum pressure: 250 psig (17 bar) Operating temperature: 0° to 175°F (-20° to 80°C)** ** Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Particle removal: Down to 0.01 µm Air quality: Within ISO 8573-1, Class 1 (particulates) and Class 2 (oil content) Maximum remaining oil content in outlet air: 0.01 ppm at 70°F (20°C) with an inlet concentration of 12 ppm. Maximum flow with at 90 psig (6.3 bar) inlet pressure to maintain stated oil removal performance: 75.0 scfm (35.4 dm 3 /s) Manual drain connection: No tube connection Automatic drain connection: Will fit 1/4-18 male pipe thread Automatic drain operating conditions (float operated): Bowl pressure required to close drain: Greater than 5 psig (0.3 bar) Bowl pressure required to open drain: Less than 3 psig (0.2 bar) Minimum air flow required to close drain: 2 scfm (1 dm 3 /s) Manual operation: unscrew drain outlet to drain bowl Nominal bowl size: 8 fluid ounce (0.24 liter) Materials of construction: Body: 316 Stainless steel Bowl: 316 Stainless steel Manual drain: 316 Stainless steel, Nitrile Automatic drain: 316 Stainless steel, Nylon, Acetal, Nitrile Filter element: Stainless steel, synthetic fiber, EPDM, polyester Elastomers: Nitrile Bowl sight glass: Pyrex Bracket: Stainless steel (optional) Service life indicator (factory option)- Body: 316 Stainless steel Lens: Transparent nylon Internal parts: Acetal Spring: 18-8 Stainless steel Elastomers: Nitrile Technical data † Confirm compatibility with materials of construction. Use in gas applications must be in a well vented or outdoor area. Products are designed with an allowable leakage and should only be used within the specifications printed on the data sheet or the product label for pressure, temperature, etc. It is the responsibility of the user to apply the product in a safe environment free from potential fire or explosive materials or components. Norgren will not be responsible for any injury or damage caused by the use of the product in an unsafe application. Stainless Steel Products F22, F22H F22 Stainless steel constructon for use in corrosive environments Provides high efficiency oil and particle removal Large filter element area for high flow and minimum pressure drop Automatic drain is operated by liquid level and also opens upon depressurization Optional service life indicator turns from green to red when the filter element needs to be replaced Metallic parts meet NACE Standard MR-01-75 * *National Association of Corrosion Engineers (NACE) MR-01-75 defines requirements for sulphide stress cracking resistant GrSym,Fltr,Auto Automatic Drain GrSym,Fltr,Man Manual Drain F22H