4
AIR
PREPARATION
PRODUCTS
APP-86
For further information www.norgren.com
Fluid:
Compressed air filtered to 5µm,
neutral gases
NOTE: Contact technical support
for use with other media.
Maximum inlet pressure:
360 psig (25 bar)
Operating temperature:
0° to 175°F (-20° to 80°C) *
* Air supply must be dry enough to
avoid ice formation at temperatures
below 35°F (2°C).
Typical flow: with 100 psig
(7 bar) inlet pressure, 23 psig
(1.6 bar) set pressure and 1.5 psig
(0.1 bar) droop from from set:
4.2 scfm
(2 dm3/s)
Gauge ports:
1/8" PTF
Materials:
Body, bonnet: zinc
Elastomers: nitrile
Technical data
11-400
Conventional Pilot Regulators
1/4" Port Size
Ordering information
Models listed are relieving with constant bleed, PTF threads, without gauge.
Pilot regulators are used to control the outlet pressure
of a pilot operated regulator (ordered separately)
The pilot regulator is installed in an accessible location
in the compressed air system; pilot operated regulator
is installed at any point without regard to accessibility
Conventional pilot regulator provides good
pressure regulation, rapid response to changing
flow demands, and excellent stability.
Constant bleed feature provides maximum sensitivity to
system changes
Relief feature allows reduction of downstream
pressure when the system is dead-ended
Service kit includes: diaphragm assemblies, valve assembly,
valve spring o-rings and valve seats for pilots.
Service Kits
Type Part number
11400-20AL-X 11400-100-20AL
ISO Symbol Port Size Model Number Range psig (bar) Weight lbs (kg)
1/4" 11400-2G-AC103 1 to 30 (0.06 to 2) 1.98 (0.90)
1/4" 11400-2G-AE103 1 to 60 (0.06 to 4) 2.07 (0.94)
1/4" 11400-2G-AG103 2 to 100 (0.16 to 7) 2.2 (1.00)
1/4" 20AL-X2G-AK103 100 to 300 (7 to 20) 2.3 (1.05)
GrSym,Reg,ConvPilot
Conventional Pilot Regulator
with Pilot Operated Regulator
