Issue link: https://onenorgren.uberflip.com/i/561434
4 AIR PREPARATION PRODUCTS APP-78 For further information www.norgren.com Fluid: Compressed air, neutral gases NOTE: Contact technical support for use with other media. Maximum inlet pressure: 300 psig (20 bar) Operating temperature: 0° to 150°F (-20° to 80°C)* * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). Typical flow with 150 psig (100 bar) inlet pressure, 90 psig (6.3 bar) set pressure and 15 psig (1 bar) droop from set: 1/2" ports: 200 scfm (94 dm3/s) 1-1/4" ports: 700 scfm (330 dm3/s) Maximum bleed rate at 50 psig (3.5 bar) outlet pressure: 0.031 scfm (0.016 dm3/s) † † Maximum bleed rate occurs under dead-end (no flow) conditions. Port sizes: Main Gauge 1/4" 1/4" 3/8" 3/8" 1/2", 3/4", 1", 1-1/4" 1/2" Thread type: PTF, ISO G Materials Body, top cap: zinc Main valve, adjusting screw: brass Pilot valve, relief valve: acetal Elastomers: nitrile Bottom Plug: acetal Technical data R24 Pressure Regulator 1/4" to 1-1/4" ports * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. ** A factory included gauge is only available with PTF threads (A in last position of model number). Ordering information Models listed are constant bleed units with relieving diaphragm, 10 to 125 psig (0.7 to 8 bar) outlet pressure adjustment range, and PTF threads. R24 -H 0 0 -RHHH Port Size Substitute 1/4" 2 3/8" 3 1/2" 4 3/4" 6 1" 8 1-1/4" A Threads Substitute PTF A ISO G parallel G Outlet Pres Adj. Ranges* Substitute 5 to 30 psig (0.3 to 2 bar) C 5 to 60 psig (0.3 to 4 bar) F 10 to 125 psig (0.7 to 8 bar) L 10 to 250 psig (0.7 to 17 bar) S Gauge Substitute With G** Without N Alternative Models High flow regulator with exceptional high relief flow Adjusting knob can be set in the field to stop at some maximum pressure setting or some minimum pressure setting Easy to adjust even at high output pressures Balanced valve minimizes effect of variations in inlet pressure on outlet pressure Constant bleed feature provides maximum sensitivity to system changes Relieving feature allows reduction of downstream pressure when the system is dead-ended Full flow gauge ports ISO Symbol Port Size Model Weight lb (kg) 1/4" R24-200-RNLA 1.90 (0.86) 3/8" R24-300-RNLA 1.83 (0.83) 1⁄2" R24-400-RNLA 1.79 (0.81) 3/4" R24-600-RNLA 2.73 (1.24) 1" R24-800-RNLA 2.73 (1.24) 1-1⁄4" R24-A00-RNLA 2.65 (1.20) Relieving