4
AIR
PREPARATION
PRODUCTS
APP-72
For further information www.norgren.com
** Models listed in the order table must not be located downstream of frequently cycling directional control valves. Order the optional bi-directional Oil-Fog Lubricator for use
under such conditions.
† Typical flow with 90 psig (6.3 bar) inlet pressure and a pressure drop of 5 psig (0.35 bar).
All around (360°) visibility of the
sight-feed dome simplifies installation and adjustment
Screw-on bowl reduces maintenance time
Can be disassembled without the use
of tools or removal from the air line
Ordering information
Models listed have PTF threads.
ISO Symbols Port Size Micro-Fog Models Oil-Fog Models** Flow scfm ( dm3/s)† Weight lbs (kg)
3/4" L17-600-MPDA L17-600-OPDA 160 (76) 3.73 (1.69)
1" L17-800-MPDA L17-800-OPDA 275 (130) 3.56 (1.62)
1-1/4" L17-A00-MPDA L17-A00-OPDA 275 (130) 4.65 (2.11)
1-1/2" L17-B00-MPDA L17-B00-OPDA 275 (130) 3.67 (1.67)
Inline Micro-Fog and Oil Fog Lubricators
L17 Lubricators
L17
Fluid:
Compressed air, neutral gases
NOTE: Contact technical support
for use with other media.
Maximum pressure:
250 psig (17 bar)
Operating temperature*:
0° to 175°F (-20° to 80°C)
* Air supply must be dry enough to
avoid ice formation at temperatures
below 35°F (2°C).
Start point (minimum flow
required for lubricator
operation):
8 scfm (3.8 dm3/s) at 90 psig (6.3
bar) inlet pressure
1" ports: 275 scfm (130 dm3/s)
Nominal reservoir size
Standard: 1 quart US (1 liter)
Manual drain connection on
1 quart reservoir: Will fit 1/8-27
and 1/8-28 pipe thread
Materials
Body: aluminum
Reservoir:
1 quart US (1 liter): aluminum
Reservoir sight glass: Pyrex
Sight-feed dome
Standard: Transparent nylon
Elastomers: chloroprene and nitrile
Technical data
L17 manual drain
