Issue link: https://onenorgren.uberflip.com/i/561428
4 AIR PREPARATION PRODUCTS APP-60 For further information www.norgren.com Full flow gauge ports High efficiency oil and particle removal Excellent flow and regulation characteristics Miniature Filter/Regulators B07 General purpose, and B39 Oil removal (coalescing) filter/regulators B07 Fluid: Compressed air, neutral gases NOTE: Contact technical support for use with other media. Maximum pressure Transparent bowl: 150 psig (10 bar) Metal bowl: 250 psig (17 bar) Particle removal: 5µm Operating temperature* Transparent bowl: -30° to 125°F (-34° to 50°C) Metal bowl: -30° to 150°F (-34° to 65°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C) B39 Fluid: Compressed air Maximum pressure Transparent bowl: 150 psig (10 bar) Metal bowl: 250 psig (17 bar) Particle removal: Down to 0.01 µm Maximum remaining oil content in outlet air: 0.01 ppm at 70°F (20°C) with an inlet oil concentration of 17 ppm. Operating temperature* Transparent bowl: -30° to 125°F (-34° to 50°C) Metal bowl: -30° to 150°F (-34° to 65°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C) Materials B07 Body: zinc Bonnet: acetal Valve: brass/nitrile Valve seat: acetal Transparent bowl: polycarbonate Metal: zinc Element: sintered polypropylene Elastomers: chloroprene, nitrile B39 Body: zinc Bonnet: acetal Valve: brass/nitrile Valve seat: acetal Transparent bowl: Polycarbonate Metal: zinc Element: synthetic fiber and polyurethane foam Elastomers: chloroprene, nitrile Technical data B07 B39 Ordering information Models listed include PTF threads, transparent bowl, relieving diaphragm, gauge, automatic drain, 5 to 100 psig (0.3 to 7 bar) outlet pressure adjustment range* * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. † Typical flow with 100 psig (7 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a 15 psig (1 bar) droop from set. †† Maximum flow with 90 psig (6.3 bar) inlet pressure to maintain stated oil removal performance ISO Symbol Port Size Model Number Flow scfm (dm3/s) Weight lbs (kg) Service kit 1/8" B07-102-A1KA 13 (6.2 dm3/s †) 0.57 (0.26) 3820-02 1/4" B07-202-A1KA 14 (6.5 dm3/s) † 0.57 (0.26) 3820-02 1/4" B39-202-A0KA 4.0 (1.9)†† 0.57 (0.26) 3407-66 Automatic Drain Relieving