Issue link: https://onenorgren.uberflip.com/i/555887
1 ACTUATORS ACT-184 For further information www.norgren.com SYM-ZYL-M-91000-M(ISO) SYM-ZYL-M-93000-M(ISO) Standard models Low friction, long life seal design Fully non-corrodible specification Corrosion resistant specification Non-lube operation Optional non-rotating piston rod Standard magnetic piston for full control system versatility Piston Port Magnetic, standard Magnetic, non-rotating Ø rod Ø size Spring return Spring extend Service kit Spring return Spring extend Service kit 12 6 10-32 DC/91012/M/* DC/93012/M/* – – – – 16 8 10-32 DC/91016/M/* DC/93016/M/* – RC/91016/N2/* RC/93016/N2/* – 20 10 10-32 DC/91020/M/* DC/93020/M/* – RC/91020/N2/* RC/93020/N2/* – 25 12 10-32 DC/91025/M/* DC/93025/M/* – RC/91025/N2/* RC/93025/N2/* – 32 16 1/8 NPT DC/91032/M/* DC/93032/M/* – RC/91032/N2/* RC/93032/N2/* – 40 16 1/8 NPT DC/91040/M/* DC/93040/M/* – RC/91040/N2/* RC/93040/N2/* – 50 20 1/8 NPT DC/91050/M/* DC/93050/M/* QM/92050/00 RC/91050/N2/* RC/93050/N2/* QM/92050/N2/00 63 20 1/4 NPT DC/91063/M/* DC/93063/M/* QM/92063/00 RC/91063/N2/* RC/93063/N2/* QM/92063/N2/00 * Insert stroke length in inches. DC/91000/M Theoretical forces lbs (nm) at 87 psi (6 bar) DC/93000/M Theoretical forces lbs (nm) at 87 psi (6 bar) Ø Outstroke Instroke 12 12.8 (57) 1.57 (7) 9.0 (40) 1.57 (7) 16 23.2 (103) 2.81 (12.5) 16.2 (72) 2.81 (12.5) 20 36.2 (161) 3.26 (14.5) 26.8 (119) 3.26 (14.5) 25 59.3 (264) 4.50 (20) 44.3 (197) 4.50 (20) 32 97.1 (432) 7.19 (32) 70.0 (311) 7.19 (32) 40 154.4 (687) 9.89 (44) 127.3 (566) 9.89 (44) 50 245.9 (1094) 12.70 (56.5) 203.7 (906) 12.70 (56.5) 63 397.9 (1770) 16.75 (74.5) 355.6 (1582) 16.75 (74.5) F1 = Return force of spring (N). Series 91000 Compact Actuators DC/91000/M, DC/93000/M Single acting Ø 12 ... 63 mm Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Operation: DC/91000/M Single acting, non-cushioned, magnetic piston spring return DC/93000/M Single acting, non-cushioned, magnetic piston spring extend Operating pressure: 14.5 to 145 psi (1 to 10 bar) Operating temperature: 23°F* to 176°F (-5°C to +80°C) Consult our Technical Service for use below 35°F (+2°C) Materials Barrel & end caps: anodised aluminum alloy Piston rod: stainless steel (Ø 12 to 40 mm Austenitic, Ø 50 and 63 mm Martensitic) Seals: polyurethane and/or nitrile rubber