Issue link: https://onenorgren.uberflip.com/i/555884
1 ACTUATORS ACT-178 For further information www.norgren.com Spring Forces Force Factor Data Bore Code Force Factor (Area) Extend Retract 9/16" (056) 0.25 0.20 3/4" (075) 0.44 0.36 1-1/16" (106) 0.89 0.69 1-1/2" (150) 1.77 1.46 2" (200) 3.14 2.70 2-1/2" (250) 4.91 4.47 3" (300) 7.07 6.47 Force Output Formula Cylinder Output Force = Force Factor (area) x Air Line Pressure (psi) Ex: 1-1/16 bore cylinder operating at 80 psi: Force exerted on the extend: 0.89 x 80 = 71.2 lbs. Force exerted on the retract: 0.69 x 80 = 55.2 lbs. Approximate Cylinder Weights (lbs.) FP FPD FPR, FPC Nose Mount Option Bore Code Base Adder per 1/8" stroke Base Adder per 1/8" stroke Base Adder per 1/8" stroke Adder to Base Weight 9/16" (056) 0.075 0.005 0.081 0.009 0.094 0.005 0.006 3/4" (075) 0.119 0.006 0.131 0.013 0.138 0.006 0.013 1-1/16" (106) 0.306 0.019 0.363 0.025 0.331 0.019 0.069 1-1/2" (150) 0.600 0.025 0.700 0.038 0.669 0.025 0.113 2" (200) 0.813 0.031 0.950 0.044 0.894 0.031 0.169 2-1/2" (250) 1.400 0.038 1.750 0.050 1.581 0.038 0.194 3" (300) 1.806 0.050 2.375 0.069 2.050 0.050 0.219 Spring Rates Bore Code Maximum 0.12 to 1" 1.001 to 2" 2.001 to 3" 3.001 to 4" Force (lbs.) Stroke (lb/in) Stroke (lb/in) Stroke (lb/in) Stroke (lb/in) 9/16" (056) 5.25 4.25 1.75 1.24 0.88 3/4" (075) 10.00 6.00 2.50 1.76 1.25 1-1/16" (106) 11.50 6.00 2.50 1.76 1.25 1-1/2" (150) 13.00 5.50 2.25 1.60 1.13 2" (200) 13.00 5.50 2.25 1.60 1.13 2-1/2" (250) 25.00 6.50 2.75 1.93 1.38 3" (300) 25.00 6.50 2.75 1.93 1.38 Overall length adders for options Length Adder (Add to standard cataloged length) Bore Code LF* HD** PS (Magnetic Piston) (Low Friction Seals) (Heavy Duty Cap) FP, FPD FPR FPC 9/16" (056) 0.25 0.13 0.88 0.63 0.38 3/4" (075) 0.25 0.13 0.88 0.88 0.88 1-1/16" (106) 0.38 0.19 0.88 0.88 0.88 1-1/2" (150) 0.38 0.19 0.88 0.88 0.88 2" (200) 0.38 0.19 0.88 0.88 0.88 2-1/2" (250) 0.38 0.25 0.88 0.88 0.88 3" (300) 0.50 0.25 0.88 0.88 0.88 *For Low Friction Seals used in combination with a magnetic piston, use the PS length adder only. **For Heavy Duty End Cap used in combination with a magnetic piston, use both HD and PS length adders. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore