Issue link: https://onenorgren.uberflip.com/i/555872
PRA/862000/M IVAC Industrial cylinder double acting, magnetic piston Ø 32 ... 100 mm 1 ACTUATORS ACT-88 For further information www.norgren.com Cylinders and mountings conform to ISO 15552 Complete functional unit Integrated 5/2 or 5/3 valve Additional output cylinder ports (2 & 4) Integrated flow regulator for speed control Reed or solid state switches can be mounted flush with the profile barrel Protection class IP65 Energy efficient 1 3 7 Technical data Cylinder Ø mm 32 40 50 63 80 100 Air ports G 1/8 G 1/8 G 1/8 G 1/4 G 1/4 G 3/8 Piston rod Ø mm 12 16 20 20 25 25 Piston rod thread M10 x 1.25 M12 x 1.25 M16 x 1.5 M16 x 1.5 M20 x 1.5 M20 x 1.5 Cushion length mm 19 22 24 24 27 34 Theoretical thrusts at 87 psig (6 bar) extended (N) 482 754 1178 1870 3016 4710 Theoretical thrusts at 87 psig (6 bar) retracted (N) 414 633 990 1680 2722 4416 Air consumption at 87 psig (6 bar extended cu l/cm) 0.056 0.088 0.137 0.218 0.350 0.550 Air consumption at 87 psig (6 bar retracted cu l/cm) 0.050 0.076 0.117 0.198 0.324 0.514 Standard strokes Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Particles size: Class 7, ISO 8573 – 1 (dated 2001) Humidity and water content: Air supply must be dry. Corresponding of the application and working conditions the air must be dry enough to avoid condensate. The pressure dewpoint must be minimum 15° under the application and working conditions. Oil: Class 4, ISO 8573 – 1 (dated 2001) Standard: Based on ISO 15552 (length , mounting pitch and thread dimensions according to ISO 15552. Some outside dimensions different to ISO 15552) Operation: Double acting, magnetic piston, adjustable cushioning Operating pressure: 29 to 116 psig (2 to 8 bar) Port size: G1/8, G1/4, G3/8 Cylinder diameters: 32, 40, 50, 63, 80, 100 mm Standard strokes: See below Non-standard strokes: Available 25 to1000 mm Operating temperature: 14° to 176°F (-10C to 80°C) max. Supply voltage: 24 VDC Power consumption: 2 W max Electrical connection: DIN EN175301-803, form C Manual override: Push and lock Rating: 100 % continuous duty Protection class: IP 65 Materials: Profile barrel: anodised aluminum, End covers: pressure diecast anodised aluminum Piston rod: stainless steel, see page 2 Piston rod seals: polyurethane Piston seals: polyurethane O-rings: nitrile rubber All Bores Cylinder Ø (mm) Strokes (mm) 25 50 80 100 125 160 200 250 320 400 500 32 • • • • • • • • • • • 40 • • • • • • • • • • • 50 • • • • • • • • • • • 63 • • • • • • • • • • • 80 • • • • • • • • • • • 100 • • • • • • • • • • •