Issue link: https://onenorgren.uberflip.com/i/555299
FITTINGS For further information www.norgren.com 5 FIT-07 Pneufit ® C composite and Pneufit M fittings Inch Ø 1/8" to 1/2" O/D tube Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane tube (85 or 95 durometer). Nickel plated brass components. Pre applied thread sealant on all taper threads and recessed captive O-ring on parallel threads. Internal and external hexagons on straight fittings. Immediate quality sealing using silicone free U-packing. Mounting holes on all union fittings. Introducing Miniature Pneufit M an ultra compact alternative where space is at a premium. 1 Impact resistant PBT body in black for Pneufit ® C and light gray for Pneufit ® M. 2 Release buttons are red for metric, grey for inch, and light grey oval for Pneufit ® M. 3 Stainless steel grab ring with special design to retain softer tube and provide easy releasability. 4 Silicon free U-packing provides leak tight tube seal under side loading. 5 Stem seal provides leak tight 360° swivel connection. 6 Nickel plated brass threads and notches on hex to signify NPT. 7 Pre-applied thread sealant on tapered threads and recessed captive O-ring on parallel threads. Method of assembly 1. Ensure that the end tube is cut square and is free from burrs. 2. Push the tube through the release ring button and grab ring into the fitting. 3. Push the tube firmly through the 'O' ring until it bottoms on the tube stop, then pull back. 4. To disconnect, push the tube into the fitting, hold down the release button and withdraw the tube. 1 5 6 3 4 7 2 Medium Compressed air Operating pressure 29.5" Hg vacum up to 150 psi Temperature 32°F to 140°F Materials Body: PBT Seals: NBR (silicone free) u-packaging and O-rings Threaded bodies: nickel plated zinc Release sleeve and backing ring: POM Grab-ring: stainless steel Collar: nickel plated brass Thread sealant: Chemiseal G 175 Tube sizes Standard sizes: 5/32", 3/16", 1/4", 5/16", 3/8" and 1/2" Minature sizes: 1/8", 1/4", 5/32" Thread sizes Standard sizes: 10-32 UNF, 1/8", 1/4", 3/8 and 1/2" NPT and ISO R Minature sizes: 10-32 UNF, 1/16" and 1/8" NPT Tube types Nylon 11 or 12 Polyurethane 85 or 95 durometer Technical data