Issue link: https://onenorgren.uberflip.com/i/555299
FITTINGS For further information www.norgren.com 5 FIT-29 Pneufit ® C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube Releasable stainless-steel grab-ring to grip nylon or polyurethane tube (85 or 95 durometer). Nickel plated brass components. Pre-applied thread sealant on all taper threads and recessed captive O-ring on parallel threads. Internal and external hexagons on straight fittings. Immediate quality sealing using silicone free U-packing. Method of assembly 1. Ensure that the end tube is cut square and is free from burrs. 2. Push the tube through the release ring button and grab ring into the fitting. 3. Push the tube firmly through the 'O' ring until it bottoms on the tube stop, then pull back. 4. To disconnect, push the tube into the fitting, hold down the release button and withdraw the tube. Medium Compressed air Operating pressure 750mm Hg vacuum, up to 10 bar Temperature 0 to 60°C Medium compressed air Tube sizes Standard sizes: 4, 6, 8, 10, 12, 16 mm Miniature sizes: 3, 4, and 6 mm Thread sizes Standard sizes: M5, M6, 1/8, 1/4, 3/8 and 1/2 inch, ISO G and ISO R Miniature sizes: M3, M5 and 1/8 inch ISO R Tube types Nylon 11 or 12 Polyurethane 85, 95 or 98 durometer Materials Body: PBT Seals: NBR (silicone free) u-packing and O-rings Threaded bodies: nickel plated brass Release sleeve and backing ring: POM Grab-ring: stainless steel Collar: nickel plated zinc Thread sealant: Chemiseal G 175 Technical data 1 Impact resistant PBT body in black for Pneufit ® C and light gray for Pneufit ® M. 2 Release buttons are red for metric, grey for inch, and light grey oval for Pneufit ® M. 3 Stainless steel grab ring with special design to retain softer tube and provide easy releasability. 4 Silicon free U-packing provides leak tight tube seal under side loading. 5 Stem seal provides leak tight 360° swivel connection. 6 Nickel plated brass threads and notches on hex to signify NPT. 7 Pre-applied thread sealant on tapered threads and recessed captive O-ring on parallel threads. 1 2 3 5 4 6 7