FITTINGS
For further information www.norgren.com
5
FIT-19
Pneufit
®
D fittings
Inch Ø 5/32" to 1/2" O/D tube
Ready to use
Manufactured from NSF (51 & 61) approved materials
for use in food and water applications.
Releasable stainless-steel grab-ring offers fast,
secure assembly and disassembly of nylon, PU and
PE tubing.
Suitable for use in medical and analytical equipment
including fluid and precision gas control.
Appropriate for inert gas and industrial air
applications.
Method of assembly
1. Ensure that the end tube is cut
square and is free from burrs.
3. Push the tube firmly through the 'O'
ring until it bottoms on the tube stop,
then pull back.
2. Push the tube throughthe release
ring button and grab ring into
the fitting.
4. To disconnect, push the tube into the
fitting, hold down the release button
and withdraw the tube.
1
Collet- unique oval shape
allowing for easier connecting
and disconnecting.
2
O-ring - NBR provides leak
proof seal.
3
Body and cap - made of highly
durable acetal copolymer
(POM).
4
Stainless steel teeth - holds
tubing in place
Medium:
Air and liquids
Operating pressure:
Vacuum up to 29.5" Hg
(750 mm Hg):
5/32" to 5/16", -4°F to 68°F
(-20°C to 20°C), 230 psig (16 bar)
3/8" to 1/2", -4°F to 68°F
(-20°C to 20°C), 170 psig (12 bar)
5/32" to 5/16", 68°F to 149°F
(20° to 65°C), 150 psig (10 bar)
3/8" to 1/2", 68°F to 149°F
(20° to 65°C), 100 psig (7 bar)
Temperature:
-4°F to 149°F (-20°C to 65°C)
Materials:
Body: Acetal
Seals: Food and water grade NBR
Collet: PBT with Stainless Steel
teeth
Tube sizes:
5/32", 3/16", 1/4", 5/16", 3/8"
and 1/2"
Thread sizes:
1/8", 1/4", 3/8", 1/2", 5/8" NPTF
Tube types:
Nylon, Polyurethane, Polyethylene
Technical data
1 2 3
4
