Issue link: https://onenorgren.uberflip.com/i/555299
5 FITTINGS For further information www.norgren.com FIT-22 A O.D. Tube S T Tubing Stop V 4 (5/32") 2.8 (.11) 14.0 (.55) 7.5 (.30) 5 3.4 (.13) 15.0 (.59) 10.0 (.39) 6 4.4 (.17) 15.5 (.61) 11.0 (.43) 8 (5/16") 6.0 (.24) 16.5 (.65) 13.0 (.51) 10 7.6 (.30) 21.0 (.83) 14.5 (.57) 12 9.6 (.38) 24.5 (.96) 18.0 (.71) 14 11.5 (.45) 24.5 (.96) 20.0 (.79) T V A ØS Dimensions mm (in.) Tube O.D.'s and Tube Tolerances Tube stop O-ring Collet Body Thread sealant Internal hexagon Compact units featuring retained collets and positive tube anchorage. Silicone free 'O'-ring seals. Non-PTFE based thread sealant on all BSP taper threads. Easy tube insertion for rapid assembly. Internal hexagon on straight adaptors allows assembly in confined spaces. Wide range of types available. Reliable and corrosion resistant. Thread Tightening Torque Nm (ft lbs) Size ISO R ISO G* M5 — 1 - 1.4 (.75 - 1.05) 1/8 6.9 - 8.8 (5.0 - 6.5) 7 - 9 (5.3 - 6.8) 1/4 11.8 - 13.7 (8.7 - 10.0) 9 - 12 (6.8 - 9.0) 3/8 21.6 - 23.5 (15.9 - 17.3) 34 - 38 (25.5 - 28.5) 1/2 27.4 - 29.4 (20.2 - 21.7) 41 - 47 (30.8 - 35.3) * Lower torques can be used to achieve a seal but these figures are recommended to provide some vibration resistance. Recommended tightening torques O.D. Tube Tolerances Tube O.D. Nylon Polyurethane 4 mm to 5 mm +0.05 mm (+0.002") (5/32" to 3/16") -0.07 mm (-0.003") ±0.10 mm 6 mm to 14 mm +0.05 mm (+0.002") (±0.004") (1/4" to 1/2") -0.10 mm (-0.004") LDPE –Tolerances specified in DIN 73378 or BS54-09/1:1976 Pneufit push-in fittings Metric Ø 4 to 14 mm O/D tube Fluid: Compressed air, nitrogen, inert and non-combustible gases compatible with materials of construction. For other types of fluids or compressed gases, please consult factory. Working Pressure: 750 mm Hg to 18 bar (29.5" Hg vacuum to 260 psig) Note: Flow Controls working pressures: .3 to 10 bar (5 to 150 psig) Working Temperature: -20°C to 80°C (0°F to 175°F) Request FPM option on selected part numbers for extended temperature range: -20°C to 180°C (0° to 350°F) Materials of Construction Body, swivel fitting and collet: Nickel plated brass O-ring: Silicone free Nitrile Sealing washer (parallel male threads): Silicon free nitrile Tubing: Nylon 11 or Nylon 12, Polyurethane (95 durometer or above) and LDPE (Low Density Polyethylene). Note: Lower durometer polyurethane may be used, however, an internal tube support is required to prevent internal collapse of the tube wall. Thread Sealant: Precote 5 thread sealant is factory applied to the circumference of tapered male threads (ISO R). Technical data