Issue link: https://onenorgren.uberflip.com/i/555065
2 VALVES VAL-266 For further information www.norgren.com Electrical Information Reliable, rugged proportional I/P and E/P converters Suitable for a wide range of applications Excellent accuracy High flow versions NEMA4 environmental protection in normal operation Technical data Medium: Oil free, dry air, filtered to 5 micron Output pressure: See table below Flow capacity: Up to 10 scfm (300 l/min) Air consumption <60 psig (<4 bar): 0.03 scfm (0.85 l/min) typical >60 psig (>4 bar): 0.06 scfm (1.75 l/min) typical Operating pressure: At least 10 psig (0.7 bar) above maximum required output pressure Connections: NPT ¼" or ¼" ISO G available Operating temperature: -4° to 160°F (-20°C to 70°C) Response time <30 psig (<2 bar): less than 0.5 seconds for 10-90% step change >30 psig (>2 bar): 2 seconds for 10-90% step change Total error: ±0.5% of span (typical, independent error includes the combined effect of non-linearity, hysteresis, deadzone and repeatability) Temperature effect: Typically 0.1% of span/°F for span and zero over operating range Supply sensitivity: >0.025% span output change per % supply pressure change Failure mode: Signal falls to bleed pressure when electrical supply fails Mounting: Integral surface mounting bracket provided for preferred vertical mounting. 50 mm pipe mounting kit available Material of construction: Zinc die-casting passivated and epoxy paint, nitrile diaphragms, stainless steel/nylon flapper nozzle and supply valve Mass: 3.3 lbs (1500g) approx. ISO Symbol Pressure range and input signal options Part Number Control signal Output pressure Calibration Thread form* VP1001PK100A00 0-10 V 3-15 psi (0.2-1 bar) PSIG 1/4" NPT VP1001PK400A00 4-20 mA 3-15 psi (0.2-1 bar) PSIG 1/4" NPT VP1002PK100A00 0-10 V 3-30 psi (0.2-2 bar) PSIG 1/4" NPT VP1002PK400A00 4-20 mA 3-30 psi (0.2-2 bar) PSIG 1/4" NPT VP1004PK100A00 0-10 V 3-60 psi (0.2-4 bar) PSIG 1/4" NPT VP1004PK400A00 4-20 mA 3-60 psi (0.2-4 bar) PSIG 1/4" NPT VP1006PK101A00 0-10 V 3-90 psi (0.2-6 bar) PSIG 1/4" NPT VP1006PK401A00 4-20 mA 3-90 psi (0.2-6 bar) PSIG 1/4" NPT VP1008PK101A00 0-10 V 3-120 psi (0.2-8 bar) PSIG 1/4" NPT VP1008PK401A00 4-20 mA 3-120 psi (0.2-8 bar) PSIG 1/4" NPT Electromagnetic compatibility This is a passive electromagnetic instrument and is unaffected by interfering high frequency signals Electrical signal Two wire version 4-20 mA or 0-10 V for 60< PSIG Three wire version requires 12-24 V d.c. supply Connections 30 mm square connector DIN 43650 provided, mountable in four directions (alternative connections available) * Replace PK w/BJ for calibration in Bar and ¼ ISO G thread form. VP10 Electronic Pressure Regulator