Issue link: https://onenorgren.uberflip.com/i/555065
2 VALVES VAL-268 For further information www.norgren.com Electrical Information Air piloted proportional pressure control valve Fully user adjustable for a wide range of applications High speed Lower power consumption High flow capacity Optional manifold mount utilizes the ISO Size 2 subbase Technical data Medium: Compressed air, filtered to 5 micron, non-lubricated Operation: Proportional, direct acting air piloted spool Output Pressure: See website Supply Pressure: 200 psig (14 bar) max Supply Sensitivity: Better than 0.75% span output change per bar supply pressure change Flow Capacity: Up to 50 scfm (1400 Nl/min) Response Time: < 80 mS (from 10-90% of output pressure into a 0.1 litre load) Air Consumption: < .177 scfm (5 l/min) Port Size: ¼ PTF (G¼) Total Error: Max. error < ±1% of span (independent error includes the combined effect of non-linearity, hysteresis, deadzone and repeatability) Operating Temperature: 23° to 120°F (-5° to 50°C) Temperature Effect: Typically better than 0.03% of span/˚C for span and zero over operating range Degree of protection: NEMA 4 (IP65) in normal operation Vibration Immunity: < 3% output shift for 3g 10-2000Hz Mounting Position: Any screw mounting or manifold mount Material of Construction: Aluminium body, zinc diecast lid and end cover Weight: 1.76 lbs. (800g) approx Symbol Part Number* Pressure Range and Input Signal Options Port size Control Signal Output Pressure in psig (bar) VP5010PK111H00 0-10V 0-145 ( 0-10) 1/4" PTF VP5010PK411H00 4-20mA 0-145 ( 0-10) 1/4" PTF VP5006PK111H00 0-10V 0-90 ( 0-6) 1/4" PTF VP5006PK411H00 4-20mA 0-90 ( 0-6) 1/4" PTF VP5002PK111H00 0-10V 0-30 ( 0-2) 1/4" PTF VP5002PK411H00 4-20mA 0-30 ( 0-2) 1/4" PTF * To specify regulator calibration in BAR use "B" in the 7th position For ¼" ISO G ports use "J" in the 8th position. To order the VP50 with interface for manifold mounting, indicate an "X" in the 8th position of the part number. Also requires a manifold mounting kit, see Accessories. All units shipped with M12 five pin electrical connector Electromagnetic Compatibility CE marked: conforms to E.C. requirements EN 50081-2 (1994) and EN 50082-2 (1995) Electrical Input Signal 4-20mA or 0-10V factory set Electrical Power Input 24V dc ±25% (power consumption < 1W) Output Pressure Feedback Signal 0-10V full range Connections DIN 43650 or Brad Harrison connection for feedback output 2 1 3 p VP50 Proportional Pressure Control Valve