VALVES
2
VAL-71
For further information www.norgren.com
Multipole components
A – Connector kit for conduit entry
11
B
A
B – Output boards for conduit entry
Part Number Connector Type Description Expandable to max.
no. of stations 1)
Rectified Board Input Voltage Output Voltage
VS4540551-KG00* 1" Conduit entry Multipole PCB 2 stations 6 Yes 110/120 VAC 24 VDC
VS4540551-KG01* 1" Conduit entry Multipole PCB 4 stations 8 Yes 110/120 VAC 24 VDC
VS4540551-KG02* 1" Conduit entry Multipole PCB 6 stations 10 Yes 110/120 VAC 24 VDC
VS4540551-KG03* 1" Conduit entry Multipole PCB 8 stations 12 Yes 110/120 VAC 24 VDC
VS4540556-KG00 1" Conduit entry Multipole PCB 2 stations 6 No 24 VDC 24 VDC
VS4540556-KG01 1" Conduit entry Multipole PCB 4 stations 8 No 24 VDC 24 VDC
VS4540556-KG02 1" Conduit entry Multipole PCB 6 stations 10 No 24 VDC 24 VDC
VS4540556-KG03 1" Conduit entry Multipole PCB 8 stations 12 No 24 VDC 24 VDC
*NOTE: The 1" conduit output boards used on the VS45 incorporate integrated power rectification and regulation from 115 VAC to 24 VDC on the output boards.
The 115 VAC voltage being supplied to the 1" conduit is converted to a 24 VDC signal to the valves on the manifold. Therefore, even though the manifold is wired
for AC, the valves used on the manifold are 24 VDC.
1) By using below expansion output boards.
Model Description Voltage
VS4540440-KG00 E-Connector-kit NPTF1 Conduit entry 115V AC, 24 VDC
Expansion output boards
Model Description Voltage
VS4540553-KG00 Multipole PCB 1 station 24 VDC
VS4540553-KG01 Multipole PCB 2 stations 24 VDC
11
Torque = 7.1 - 8.0 ibf in (0.8 - 0.9 Nm)
Valve Manifolds VS45 Series
2x3/2, 5/2 and 5/3 valves
Size 45 mm
