2
VALVES
VAL-94
For further information www.norgren.com
NITUFF
®
coated non-corrosive spool and sleeve for long trouble
free life (100 million plus cycles)
Integral flow controls for cylinder speed control on size #1,
and #2 models
Low power solenoids with manual override options
End and CNOMO solenoid pilots
Base mounted soft start valves available
Minimal maintenance
Technical data
Medium:
Compressed air, 40µm filtered,
lubricated or non-lubricated
Operation:
Glandless spool valve, solenoid
pilot or air pilot actuated
Mounting:
On sub-bases
Sizes:
#1, #2, #3
Meets ISO 5599/1
Operating Pressure:
Maximum pressure
145 psig (10 bar) solenoid pilot
actuated valves with internal pilot
supply
232 psig (16 bar) solenoid pilot
actuated valves with external pilot
supply
232 psig (16 bar) air pilot actuated
valves
Flow Characteristics (unregulated):
Size Cv l/min
#1 1.2 5.5
#2 2.4 10.7
#3 4.4 17.9
Ambient Temperature:
5°F* to 122°F (–15°C to 50°C)
solenoid pilot actuated valves
5°F* to 176°F (–15°C to 80°C) air
pilot actuated valves
*Consult our Technical Service for use
below 36°F (2°C)
Materials:
Die cast aluminum body. Hard
anodized, PTFE coated, matched
aluminum spool and sleeve. FPM
and nitrile rubber seals. Zinc die
cast locking plate. POM plastic
parts. Zinc plated screws. Brass
flow regulators.
Ordering Information
To order select model number, add
voltage code and connector code,
e.g. SXE 0573-A60-00/13JB for
a 5/2 double end solenoid pilot
size #1 valve with internal pilot air
supply, integral flow regulators,
shrouded push button lockable
manual override, 22 mm coil 24
VDC with cable grip connector.
ISO Star Series Valves 5/2 and 5/3 ISO 5599/1
solenoid and air pilot actuated valves
5/2
5/3
Fully Sealed
Midi Star
5/3
Supply blocked
mid-position
5/3 Dual outlet
5/2
5/3
All ports blocked mid position
5/3
Center open exhaust mid position
5/3
Center open pressure mid position
