52
1
For further information www.norgren.com/us
VALVES
Symbol Orifice
(mm)
Port size
*1
Kv-value
(m
3
/h)
Operating pressure
(bar)
Model
P
A
8 G1/4 1.7 0.1…10 8247000.9100.00000
10 G3/8 2.7 0.1…10 8247100.9100.00000
12 G1/2 3.4 0.1…10 8247200.9100.00000
20 G3/4 5.5 0.1…10 8247300.9100.00000
25 G1 8.5 0.1…10 8247400.9100.00000
Brass – For neutral gases and liquids
Models
Medium:
Neutral gases and liquids
Flow direction:
Fixed
Operating pressure:
0,1 … 10 bar (1,4 ... 145 psi)
for Details, See table
Temperatur:
Fluid
0°C … +150°C (32 ... +302°F) max.
Ambient
–10°C … +60°C (14 ... +140°F) max.
Air supply must be dry enough to avoid ice formation
at temperatures below +2°C (+35°F).
Materials:
Body: Brass
Seat seal: HNBR
Internal Parts: Stainless steel, Brass
For contaminated fluids installations of
an upstream filter is recommended.
Technical features
Solenoid interchangeable
without tools (Click-on
®
)
Other functions and operating voltages
available on request
Solenoid operators
Design DIN VDE 0580
Voltage range ±10%
Duty cycle 100% ED
Protection EN 60529 IP65
Connector Form A to DIN EN 175301-803 (included)
Electrical details for all solenoid systems
Voltage and Frequency Solenoid 9101
*1
Code
Voltage
Code
Frequency
Voltage Frequency Power consumption
Inrush- Holding-
power power
024 00 24 VDC - 8 W 8 W
024 50 24 VAC *2 50 Hz 15 VA 12 VA
110 50 110 VAC *2 50 Hz 15 VA 12 VA
120 60 120 VAC *2 60 Hz 15 VA 12 VA
230 50 230 VAC *2 50 Hz 15 VA 12 VA
*1 Voltage
*2 A.c. only with rectifier plug
Buschjost 82470
Indirect solenoid actuated diaphragm valves
2/2 N/C, G1/4….G1
According to DIN VDE 0580 at a solenoid temperature of +20°C.
At elevated temperatures, the power of the solenoid coil could be reduced by up
to 30%.
*1 NPT versions may be available upon request. Contact technical support.
