Issue link: https://onenorgren.uberflip.com/i/552086
3 73 PRESSURE SWITCHES & SENSORS For further information www.norgren.com/us 18D Electrical connection acc. to DIN EN 175301-803, form A - connector included in the scope of supply. The Ex approval refers to the pressure switch in combination with the supplied plug. 18D Electrical connection M12 x 1 acc. IEC 947-5-2 - connector are not included in delivery, max. allowable voltage 30 V max.The pressure switch will lose the Ex approval when using other connectors than those listed in the data sheet. *1) Setpoints should be ideally in the middle of the switching pressure range. Reference pressure = atmospheric pressure. Switching pressure must not exceed the indicated values. *2) Max. values. *1) Setpoints should be ideally in the middle of the switching pressure range. Reference pressure = atmospheric pressure. Switching pressure must not exceed the indicated values. *2) Max. values. *3) NPT versions may be available upon request. Please contact technical support. For Ex applications conforming to Zone 2 (gases): II3G Ex nAC IIC T6 X and Zone 22 category (dusts): II3D Ex tD A22 IP65 (e.g. IP67) T80°C X. Medium: For neutral, self lubricating fluids,e.g. hydraulic oil, lube oil, light fuel oil Operation: Softseal piston Degree of protection: IP65 for DIN EN 175301-803 (DIN 43650) form A IP67 for M12 x 1 Electrical connection: DIN EN 175301-803 (DIN 43650) form A or M12 x 1 IEC 947-5-2 Fluid/Ambient temperature: 0 ... +80°C (0 ... +176°F) Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F) Materials: Housing: Aluminum/Steel Sealing: PTFE/NBR For accessories - please see page 72 Technical features Microswitch with gold plated contacts Microswitch approved by UL and CSA Symbol Model Pressure range *1) (bar) Switching pressure difference Lower range Upper range (bar) (bar) Max. Over pressure *2) (bar) Switching cycles (1/min) Materials Pressure Sealing sensor housing Port size 0882180000000000 5 ... 70 10.5 15 400 100 AL/Steel PTFE/NBR G1/4 0882280000000000 10 ... 160 11 17 400 100 AL/Steel PTFE/NBR G1/4 0882380000000000 25 ... 250 13 21 400 100 AL/Steel PTFE/NBR G1/4 0882480000000000 40 ... 420 17 38 600 100 AL/Steel PTFE/NBR G1/4 0883180000000000 5 ... 70 10.5 15 400 100 AL/Steel PTFE/NBR Flange 0883280000000000 10 ... 160 11 17 400 100 AL/Steel PTFE/NBR Flange 0883380000000000 25 ... 250 13 21 400 100 AL/Steel PTFE/NBR Flange 0883480000000000 40 ... 420 17 38 600 100 AL/Steel PTFE/NBR Flange 0882119000000000 5 ... 70 10.5 15 400 100 AL/Steel PTFE/NBR 7/16-20 UNF 0882120000000000 5 ... 70 10.5 15 400 100 AL/Steel PTFE/NBR 1/4 NPT 0882219000000000 10 ... 150 11 17 400 100 AL/Steel PTFE/NBR 7/16-20 UNF 0882220000000000 10 ... 150 11 17 600 100 AL/Steel PTFE/NBR 1/4 NPT 0882319000000000 25 ... 248 11 17 400 100 AL/Steel PTFE/NBR 7/16-20 UNF 0882320000000000 25 ... 248 11 17 400 100 AL/Steel PTFE/NBR 1/4 NPT 0882420000000000 40 ... 421 17 35 400 100 AL/Steel PTFE/NBR 1/4 NPT Symbol Model Pressure range *1) (bar) Switching pressure difference Lower range Upper range (bar) (bar) Max. Over pressure *2) (bar) Switching cycles (1/min) Materials Pressure Sealing sensor housing Port size*3) 0882181000000000 5 ... 70 10.5 15 400 100 AL/Steel PTFE/NBR G1/4 0882281000000000 10 ... 160 11 17 400 100 AL/Steel PTFE/NBR G1/4 0882381000000000 25 ... 250 13 21 400 100 AL/Steel PTFE/NBR G1/4 0882481000000000 40 ... 420 17 38 600 100 AL/Steel PTFE/NBR G1/4 0883181000000000 5 ... 70 10.5 15 400 100 AL/Steel PTFE/NBR Flange 0883281000000000 10 ... 160 11 17 400 100 AL/Steel PTFE/NBR Flange 0883381000000000 25 ... 250 13 21 400 100 AL/Steel PTFE/NBR Flange 0883481000000000 40 ... 420 17 38 600 100 AL/Steel PTFE/NBR Flange 18D Hydraulic ATEX Electro-mechanical pressure switch 5 ... 420 bar, G1/4 & Flange