Issue link: https://onenorgren.uberflip.com/i/504900
1 51 For further information www.imi-precision.com VALVES Symbol Model Orifice (mm) Port size Kv-value (m 3 /h) Operating pressure (bar) P A 8240000.9101.02400 8 G1/4 1.9 0.1…16 8240100.9101.02400 10 G3/8 3 0.1…16 8240200.9101.02400 12 G1/2 3.8 0.1…16 8240300.9101.02400 20 G3/4 6 0.1…16 8240400.9101.02400 25 G1 9.5 0.1…16 8240500.9101.02400 32 G1 1/4 23 0.1…10 8240500.9151.02400 32 G1 1/4 23 0.1…16 8240600.9101.02400 40 G1 1/2 25 0.1…10 8240600.9151.02400 40 G1 1/2 25 0.1…16 8240700.9101.02400 50 G2 41 0.1…10 8240700.9151.02400 50 G2 41 0.1…16 Symbol Model Orifice (mm) Port size Kv-value (m 3 /h) Operating pressure (bar) P A 8273000.9101.02400 8 G1/4 1.9 0.1…16 8273200.9101.02400 12 G1/2 3.8 0.1…16 8273300.9101.02400 20 G3/4 6 0.1…16 8273400.9101.02400 25 G1 9.5 0.1…16 Brass – For neutral, gases and liquids Models Stainless steel – For aggressive gases and liquids Medium: Neutral gases and liquids (82400) Slightly aggressive gases and liquids (82730) Flow direction: Fixed Operating pressure: 0,1 … 16 bar (1,4 ... 232 psi) for Details, See table Temperature: Fluid –10°C … +90°C (14 ... +194°F) max. Ambient –10°C … +50°C (14 ... +122°F) max. Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F) Materials: Body: Brass (82400) or Stainless steel (82730) Seat Seal: NBR Internal parts: Stainless steel, PVDF, For contaminated fluids installations of an upstream filter is recommended. Technical features Solenoid interchangeable without tools (Click-on ® ) Other functions and operating voltages available on request Solenoid operators Design DIN VDE 0580 Voltage range ±10% Duty cycle 100% ED Protection EN 60529 IP65 Connector Form A to DIN EN 175301-803 (included) Electrical details for all solenoid systems Voltage and Frequency Solenoid 9101 *1) Code Voltage Code Frequency Voltage Frequency Power consumption Inrush- Holding- power power 024 00 24 V DC - 8 W 8 W 024 50 24 V AC 50 Hz 15 VA 12 VA 110 50 110 V AC 50 Hz 15 VA 12 VA 120 60 120 V AC 60 Hz 15 VA 12 VA 230 50 230 V AC 50 Hz 15 VA 12 VA Voltage and Frequency Solenoid 9151 *1) 024 00 24 V DC - 18 W 18 W 024 50 24 V AC 50 Hz 45 VA 35 VA 110 50 110 V AC 50 Hz 45 VA 35 VA 120 60 120 V AC 60 Hz 45 VA 35 VA 230 50 230 V AC 50 Hz 45 VA 35 VA ATEX Category Protection Solenoid Standard voltage II2GD EEx m II T4 T 130°C with 3 m Connection cable 9136 24 V DC, 110 V AC, 230 V AC Additional solenoid systems *1) Voltage Buschjost 82400 and 82730 Indirect solenoid actuated diaphragm valves 2/2 N/C, G1/4….G2 According to DIN VDE 0580 at a solenoid temperature of +20°C. At elevated temperatures, the power of the solenoid coil could be reduced by up to 30%. Attention! The conditions imposed on the Ex approvals lead to reduction of the permissible standard temperature ranges in the cases of explosion protected solenoids.